Special tool for the exact determination of the ignition moment for all types with ignition plug thread M14.

This nut has to be screwed in instead of the ignition plug. The middle pin has to be tightened. The height of the piston can be determined on a scale. The accurateness is better that 1/10mm.

Not suitable for cylinder heads, in which the ignition plug has to be screwed in angularly (ES 250/2, ETS250, TS250/0).

Solid, galvanized version.







Product no.: 051

Screws according to DIN 912. All screws with hexagon socket and galvanized. From 20 - 90 mm length available.

Please choose the length:





Please choose the length:


Product no.: 1365

Product no.: 32077

Größe 4,8 x 13


Product no.: 090123

Größe 5,5 x 22


Product no.: 090126

Set of screws for ES 250-1. The set is complete except for the screws of the engine block. All parts are galvanized and in original design in form of slotted screws and hexagon screws.

The set consists of over 230 parts!






Product no.: 1741

New set of screws for chassis 2.8, especially for MZ ETZ125 and ETZ150. Consists of 4 screws, 2 flat washers and 2 spring washers, galvanized.






Product no.: 2630

New set of screws for the chassis 2.9, especially for MZ ETZ125 and ETZ150. Consists of 2 galvanized screws.







Product no.: 2631

Product no.: 2629

New set of screws for the chassis 2.6, especially for MZ ETZ125 and ETZ150. Consists of 2 crews, 2 flat washers, 1 spring washer and 3 nuts, all galvanized.






Product no.: 2628

New set of screws for the chassis2.18, especially for MZ ETZ125. Consists of 2 screws, 2 flat washers, 2 spring rings and 2 nuts, all galvanized.






Product no.: 2640

Double fitting between brake tongs and brake hose, suitably to all caliper of MZ, used with ETZ125, ETZ150, ETZ250, ETZ251, ETZ301.

MZ number: 30-24.160


Product no.: 3202

16-part set of screws for all exhaust pipes of  all TS and ETZ types. The set consists of 6 screws, 5 nuts, 4 spring rings and 1 washer. all parts are made of high-grade steel and are therefore rust free. Matches perfectly to the clamps offered in the shop.






Product no.: 704

Hold screw for rotor, suitably to all generators of MZ, except electronic Lima.
Special manufacture.

MZ Nummer:
94-16.741


Product no.: 3204

Nut according to German Industrie Standard, galvanized version.

Please choose the size:



Please choose the size:



Product no.: 1367

Galvanized haexagon screws according to German Industry Standard. Metric thread M10. Wrench size 17.

Please choose the length:



Please choose the size:


Product no.: 1429

Rust free hexagon screws according to German Industry Standard, metric thread M10. Wrench size 17.

Please choose the size:




Please choose the size:


Product no.: 1423

Galvanised hexagon bolts after German industrial standard, metrical thread M6.

Please, for the choice of the length click on the picture:


Product no.: 1427

Rust free hexagon screws according to German Industry Standard, metric thread M6. Wrench size 10.

Please choose the length:




Please chosse the length:


Product no.: 1421

Hold screw for rotor, suitably with all Vape - generators with MZ, ETZ125, ETZ150, ETZ250, ETZ251




Product no.: 3205

Galvanised hexagon bolts built after German industrial standard, metrical thread M8.

Please, for the choice of the length click on the picture:


Product no.: 1428

M12 x 1,5


Product no.: 090014

Product no.: 3548

Nut of the size M14x1,5, suitably in axes of MZ, types ETZ.

M14 x 1,5


Product no.: 3188

New set of screws for chassis 2.10, especially for MZ ETZ125 and ETZ150. consists of 3 screws, 3 flat washers, 2 spring washers, 1 spring ring and 5 nuts, all galvanized.






Product no.: 2632