2.11. Rear wheel drive

Kettenkasten MZ , ETZ Kettenschlauch Paar MZ ETZ 125 und ETZ 150 Mutter M14x1,5 Federscheibe 14 Senkschraube BM6x8 Ritzel für Tachoantrieb ETZ Lagerbuchse Tachoantrieb MZ TS / ETZ Dichtungsstück für Kettenkasten MZ Distanzhülse für Kettenkasten MZ, ETZ - Modelle Hakensprengring in Kettenkasten MZ ES, ETS, TS, ETZ Schraubenrad für Tachometerantrieb MZ ETZ 125, 150, 251 Kettenschlauch Paar MZ ETZ 125 und ETZ 150 Kette ETZ 125 150 251 301 Dämpfungskörper mit Zahnkranz ETZ 125, 150 Kugellager 6004 C3, SNH Sicherungsring 42 für Hinterradantrieb MZ ETZ 125, 150 Achsverlängerung für ETZ 125 150 ETZ 250 ETZ 251 300 Dämpfungsgummi ETZ/ES/TS 125, 150 Fahrgestell Hinterradantrieb MZ ETZ 125/150
Ball bearing 6004 C3, SNH
Prod No. 1016
Bild Nr.: 13  

Replika




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,61 EUR
incl. 19% tax excl. Shipping costs
Chain cover MZ ETZ Import
Prod No. 379
Bild Nr.: 2  

FEZ

Chain cover suitable for all ETZ 125, 150, 250, 251, 301. New production, good and solid plastic. With the TS 250/1 to models the drilling must be changed, then fits also with these models. Recommended accessories: Chain guards / chain rubber ( also in the shop ).The drilling for speedometer impulse is not exact. We recommend original chain guard with the article number 379-1.

MZ number: 30-25.045

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,60 EUR
incl. 19% tax excl. Shipping costs
Chain ETZ 125 150 251 301
Prod No. 326
Bild Nr.: 17  

FEZ

Driving chain, 128 limbs suitable for all ETZ except ETZ 250. This chain is very stable. The chain is also suitable for the racing sport.  Delivery including connecting link.

Made in Germany.

MZ number: 93-70.647

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
14,72 EUR
incl. 19% tax excl. Shipping costs
Chain grease
Prod No. 139
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,15 EUR
31,50 EUR per litre
incl. 19% tax excl. Shipping costs
Chain guard MZ, genuine part ETZ
TOP
Prod No. 379-1
Bild Nr.: 2  

FEZ

Chain guard suitably for all ETZ 125, 150, 250, 251, 301. It concerns, on this occasion, a new genuine part.

MZ number: 30-25.045

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
19,00 EUR
incl. 19% tax excl. Shipping costs
Chain kit MZ ETZ 250
Prod No. 412

Replika

Contents: Wheel drive with spocket,  roll chain, Pinion  19 - cogs, Damping rubber. The best quality, on each other co-ordinated parts. With this set your driving mechanism parts (suitable for ETZ 250) are new against completely!



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
68,00 EUR
incl. 19% tax excl. Shipping costs
Chain rubber Pair MZ ETZ 125 and ETZ 150
Prod No. 010
Bild Nr.: 1  

FEZ

A pair (2 pieces) new chain flexible tubings for MZ of following models: ETZ125 and ETZ150 for the called vehicles are all chain flexible tubings in the bearing. The flexible tubings are absolutely new, not porous, the best quality. They are admitted in the safety standards authority. Measures: - Total length ca. 410 mm - opening in front ca. 25x46 mm opening behind ca 35x54 mm.

MZ number: 32-25.041

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
15,76 EUR
incl. 19% tax excl. Shipping costs
Circlip in chain cover MZ ES, ETS, TS, ETZ
Prod No. 2018
Bild Nr.: 10  
MZA-Artikelnr.:   15370-K-M    

New explosive ring for the chain guard suitably with all ES, TS 125, 150, 250/1 and ETZ 125, 150, 250, 251. This ring sits on the screwing wheel for speedometer driving mechanism and serves for the fuse.

MZ number: 01-25.315

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,01 EUR
incl. 19% tax excl. Shipping costs
Connecting link MZ
Prod No. 462
Bild Nr.: 18  
MZA-Artikelnr.:   15075-00M    

METEOR

New chain lock suitable for all MZ models.

MZ number: 93-70.776

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,58 EUR
incl. 19% tax excl. Shipping costs
Damping rubber ETZ / ES / TS 125, 150
Prod No. 376
Bild Nr.: 16  
MZA-Artikelnr.:   15097    

MZA

Damping brubber , suitably to the wheel drive for back wheel, for following models applicable: ES , TS , ETS , ETZ 125 and 150 as well as ES 175/2 and ES 250/2, ETS 150. It s a new spare part.

MZ number: 05-25.030

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,20 EUR
incl. 19% tax excl. Shipping costs
Distance sleeve ffor chain cover MZ, ETZ - models
Prod No. 1838
Bild Nr.: 9  

Replika

Distance sleeve between chain guard and rear catch (big chainwheel) of aluminium. Suitably to all MZ ETZ 125, 150, 250, 251, 301.

MZ number: 32-25.018

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,50 EUR
incl. 19% tax excl. Shipping costs
Extension for wheel spindle for all ETZ
Prod No. 1382
Bild Nr.: 15  

FEZ

Flange bolts for all ETZ. In the rear chainwheel as an extension of the wheel spindle.

MZ number: 30-25.038

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,82 EUR
incl. 19% tax excl. Shipping costs
Filzring Federbeinabdichtung passend für MZ, Simson, IWL
Prod No. 7368

FEZ

Neuer Filzring zur Staubabdichtung passen für folgende Typen ES125, ES150, ETS125, ETS150, TS125, TS150, ES175/0, ES250/0, ES300, ES175/1, ES250/1, ES175/2, ES250/2 ETS250, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301,IWL Troll, Simson S51 und SR50. Die Maße sind 10x19x4mm.
MZ Nr.: 05-23.074
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,20 EUR
incl. 19% tax excl. Shipping costs
Kette ETZ 125 150 251 301 Favorit
NEW
Prod No. 7859

ost2rad

Antriebskette, 128 Glieder passend für MZ der Typen ES250, ES300, ES250/1, ES250/2 und ETS250 Trophy. Hersteller FAVORIT, Made in EU. Die Kette muss eventuell je nach Zähnezahl der Ritzel und Stellung des Hinterrades etwas gekürtzt werden. Dies ist einfach möglich, durch das mitgelieferte Kettenschloss ist ein Zusammenbau der Kette leicht möglich.
Die genaue Größe ist 1/2 - 5/16. Die Qualität der Kette entspricht dem ehemaligen DDR - Standart.
Für Seitenwagen oder höhere Ansprüche empfehlen wir die verstärkte Kette mit unserer Teilenummer 6446.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
17,90 EUR
incl. 19% tax excl. Shipping costs
Kettenschlauch Paar passend für MZ ETZ 125 und ETZ 150 1. Qualität
23,60 EUR
incl. 19% tax excl. Shipping costs
Kugellager 6004 2Z C3 SNH
Prod No. 3518
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,80 EUR
incl. 19% tax excl. Shipping costs
Locking ring 42 for rear wheel drive MZ ETZ 125, 150
Prod No. 2377
Bild Nr.: 14  

Replika

New ring 42x1 DIN 472 for the protection of the groove ball bearing in 6004 suitably for all MZ ETZ125 and ETZ150.

MZ number: 94-40.661

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,56 EUR
incl. 19% tax excl. Shipping costs
Nut for wheel spindle MZ, ETZ, 14x1,5
Prod No. 3188
Bild Nr.: 6  

Replika

Nut of the size M14x1,5, suitably in axes of MZ, types ETZ.

M14 x 1,5

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,15 EUR
incl. 19% tax excl. Shipping costs
Rear-wheel drive chassis screws MZ ETZ 125, 150
Prod No. 2633

Replika

New set of screws for chassis 2.11, especially for MZ ETZ125 and ETZ150. Consists of 1 screw, 1 spring washer and 1 nut, all galvanized.





DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Reifen Heidenau 3,25x16 K41 passend für MZ ES ETZ und JAWA
Prod No. 7385

FEZ

Neuer Reifen der Marke Heidenau mit der Bezeichnung 3,25 - 16 K41 55P, Reinforce, bis 150 km/h zugelassen. Passend für MZ ES 175/0, ES 175/1, ES 175/2, ES 250/0, ES 250/1, ES 250/2, ETZ 125, ETZ 150, ETZ 251. Außerdem passend für JAWA. Enduroprofil.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
70,00 EUR
incl. 19% tax excl. Shipping costs
Sealing plate for chain cover MZ
Prod No. 1843
Bild Nr.: 8  

ost2rad

Plastic sealing suitable for ES , ETS , TS and all ETZ. Suitably to all MZ with speedometer driving mechanism in the chain cover.

MZ number: 13-25.022

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,50 EUR
incl. 19% tax excl. Shipping costs
Speedometer drive bush MZ TS / ETZ
Prod No. 210
Bild Nr.: 4  

FEZ

Warehouse socket, plastic for TS 250, TS 250/1, all ETZ.

MZ number: 22-25.044

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,76 EUR
incl. 19% tax excl. Shipping costs
Speedometer gear complete ETZ
Prod No. 540
Bild Nr.: 3  

Replika

Pinion for speedometer driving mechanism of the MZ - models ETZ125, ETZ150, ETZ251, ETZ301. Original product.

MZ number: 22-25.045

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
12,00 EUR
incl. 19% tax excl. Shipping costs
Tachoantrieb Ritzel Schraubenrad passend für MZ TS250 ETZ 125 150 251 Set
Prod No. 6055

Replika

Set Tachoantrieb, bestehend aus Ritzel (15 Zähne) und Schraubenrad ( 30 Zähne), passend für MZ Modelle TS250, TS250/1, ETZ125, ETZ150 und ETZ251. Nur für Ausführung mit original 16" Hinterrad und originalem Tacho. Beide Teile sind passgenau aufeinander abgestimmt. Nicht passend für MuZ Modelle oder mit Guss - Hinterrad oder mit neueren Armatureneinheiten.

MZ Nummern:
22-25.045
32-25.051


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
29,85 EUR
incl. 19% tax excl. Shipping costs
Wheel drive with spocket ETZ 125, 150
Prod No. 398
Bild Nr.: 12  
MZA-Artikelnr.:   15119    

ALMOT

Chainwheel with 48 coas incl. damping unit suitable for following models: ETZ 125, 150.
Implementation: Aluminium - casting with reimbursed metal - spocket.
Suitable accessories: Damping rubber

MZ number: 13-25.071

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
37,00 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 25 products)