Rubber seals

Abdeckgummi Schloss Kofferraumdeckel Superelastik passend für MZ
2,50 EUR
incl. 19% tax excl. Shipping costs
Abdeckkape für Blinkerträger TS250 ETZ250
Prod No. 7792

Replika

Neue Schutzkappe für die Blinkleuchtenträger passend für TS250, TS250/1 und ETZ250. Diese Kappe werden als Abdichtung benötigt wenn mann im Gespannbetrieb die rechte Blinkleuchte abmontiert. Innendurchmesser ca.10mm.
MZ Nummer: 22-39.019
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,70 EUR
incl. 19% tax excl. Shipping costs
Active protection cap for ignition coil, all MZ
Prod No. 3319

Replika

Cap for the protection by hose water, suitably with all MZ with being outside ignition coil, serially with TS250 built-in.

MZ Nummer:
22-34.212

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
13,40 EUR
incl. 19% tax excl. Shipping costs
Anschlaggummi Kickstarter passend für ES250
Prod No. 7747

FEZ

Neuer Gummi für Kickstarter passend für ES175, ES250, ES250/1, ES175/1 und ES300. Der Puffer wird den Kickstarter gezogen und puffert den Kickstarter. Alternativartikel.
MZ Nummer: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,70 EUR
incl. 19% tax excl. Shipping costs
Anschlaggummi Kippständer passend für MZ ES 250/2 ETS 250
2,50 EUR
incl. 19% tax excl. Shipping costs
Auflagegummi hinten Tank passend für MZ ETZ
3,70 EUR
incl. 19% tax excl. Shipping costs
Auflagegummi vorn Tank passend für MZ ETZ
2,40 EUR
incl. 19% tax excl. Shipping costs
Auflagekörper Tank passend für MZ ES175 ES250 ETS250 Gummi Tank vorn
5,10 EUR
incl. 19% tax excl. Shipping costs
Auflagestopfen vorn Tank passend für MZ ETZ
2,40 EUR
incl. 19% tax excl. Shipping costs
Batteriespannband für SIMSON und passend für MZ, Elastik
Prod No. 1685

Replika

Spannband für die Befestigung der Batterie, passend bei fast allen SIMSON S51 S70 S50 S53 S83 Roller SR50 SR80 SR1 SR2 Schwalbe KR51/1 KR51/2 Spatz KR50 Sperber Star Habicht und MZ ETZ 125 150 ETZ 250 ETZ 251 300 TS 125 150 TS 250/0 250/1 ETS 125 150 ETS 250 MZ ES 150 ES 175 ES 175/2 ES 250/0 ES 250/1 ES 250/2- Modellen.
Dieses Band ist aus einer speziellen Gummimischung und absolut säurefest. Es ist sehr elastisch und dehnbar bis zu einer Länge von ca. 420 mm. Aus diesem Grund auch für Oldtimer wie AWO, BK, ES und andere geeignet.
Grundgröße: Länge 230mm, Breite 30mm, etwa 1,5mm dick.
Lieferung inklusive der 2 Metallstifte für Befestigung.


Simsonkatalog Nr: 420821,01-30.232

Batteriespannband


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,00 EUR
incl. 19% tax excl. Shipping costs
Battery base IWL RT125 AWO EMW BK350
Prod No. 3453

FEZ

Battery base from foamed rubber, suitably in models MZ RT 125, BK 350 as well as AWO and models IWL. Suitably for our battery with the order number 2598.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
Weight: 0,6 kg per piece
4,20 EUR
incl. 19% tax excl. Shipping costs
Battery support, rubber MZ ETZ
Prod No. 2587

Replika

New rubber under the battery suitably with all MZ ETZ 125, 150, 250 and 251.

MZ number: 30-34.126

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,10 EUR
incl. 19% tax excl. Shipping costs
Bearing rubber engine shoe MZ ETZ, TS, ES250 / 2
Prod No. 2090

Replika

New rubber for the engine fixture suitably with all MZ ETZ125, ETZ150, ETZ250, ETZ251, TS250 / 0, TS250 / 1 and ES250 / 2.

MZ number: 16-21.258

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,70 EUR
incl. 19% tax excl. Shipping costs
Big rear mudgard MZ TS, ETZ
Prod No. 2786

Replika

New hose cloth for rear guard with logo MZ suitably for MZ TS125, TS150 and all TS250. In the models ETZ this hose protection was not obstructed original, however, also fits. Incl. attachment metal sheet and screwing. Size approx. 16 cm x 25 cm
MZ number: 22-30.109

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
15,50 EUR
incl. 19% tax excl. Shipping costs
Blanking plugs for MZ, ES and TS
Prod No. 1716

ost2rad

Oval rubber for sealing in the engine cabinet with different ones ES and model TS.

MZ number: 11-41.018

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,10 EUR
incl. 19% tax excl. Shipping costs
Cable realisation engine case, RT, ES 125 / 150, Berliners
Prod No. 3134

Replika

Realisation for cable in the engine block, suitably with MZ, RT125, ES125, ES150 and Berlin scooter.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,20 EUR
incl. 19% tax excl. Shipping costs
Cable realisation for rear light SIMSON and MZ
Prod No. 1888

ost2rad

Elastic socket for the cable realisation with different back lamps; suitably in oldtimer lamps and newer models.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,40 EUR
incl. 19% tax excl. Shipping costs
Cable realisation headlamp MZ ETZ
Prod No. 1221

Replika

Rubber plugs for all headlights ETZ. All rubber is not drilled and can be broken through when required. This set consists as illustrated of 5 pieces of rubber. This stopper is for hole diameter of ca. 14-16 mm.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,20 EUR
incl. 19% tax excl. Shipping costs
Cable realisation headlamp MZ ETZ original form
Prod No. 2541

ost2rad

Blanking plug for all headlights ETZ. All rubber are not drilled and can be broken through when required. This stopper is for hole diameter of ca. 14-16 mm.

MZ number: 10414


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Cable realisation headlamp MZ TS
Prod No. 1238

Replika

Rubber plugs for all headlights TS. All rubber is not drilled and can be broken through when required. This set consists as illustrated of 4 pieces of rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,30 EUR
incl. 19% tax excl. Shipping costs
Cable realisation, elastic sleeve following machine cable TS125 / 150
Prod No. 1751

Replika

Rubber sleeve for the cable realisation in the engine cabinet of the MZ - models TS 125 TS150.

MZ number: 01-30.252

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,70 EUR
incl. 19% tax excl. Shipping costs
Chain rubber MZ ES250/2 and ETS250
Prod No. 501

FEZ

A piece of chain guard flexible tubing for the both MZ- models ES 250/2 and ETS 250. This flexible tubing is new of course and not porous. Unfortunately, it is not more favorable to us at the moment possibly this part to offer. The chain rubber for this is not on bearing. This implementation was sometimes used also with the other models ES175 and ES250 (0 and 1). Whole length approx. 360 mm, opening in front inside approx. 60 x 43 mm, opening behind inside ca. 50 x 36 mm.

MZ number: 05-28.042

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
24,00 EUR
incl. 19% tax excl. Shipping costs
Chain rubber Pair ES, TS 150
Prod No. 094

FEZ

A pair (2 pieces) new chain flexible tubings for MZ of following models: ES125, ES150, ES175, ES250, ES250 / 1, TS125, TS 150 (for ES250 / 2) for the called vehicles are not all chain flexible tubings in the bearing. The flexible tubings are absolutely new, not porous, the best quality. They are admitted in the safety standards authority. Measures: - Total length ca. 370 mm - opening in front ca 26x58 mm - opening behind ca. 26x46 mm.

MZ number: 13-28.014

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,80 EUR
incl. 19% tax excl. Shipping costs
Chain rubber Pair MZ ETS 125, ETS 150
Prod No. 085

ost2rad

A pair (2 pieces) new chain flexible tubings for MZ of following models: ETS125 and ETS150 for the called vehicles are all chain flexible tubings in the bearing. The flexible tubings are absolutely new, not porous, the best quality. They are admitted in the safety standards authority. Measures: - Total length ca. 370 mm - opening in front ca. 26x58 mm opening behind ca 26x46 mm.

MZ number: 13-28.014

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
24,40 EUR
incl. 19% tax excl. Shipping costs
Chain rubber Pair MZ ETZ 125 and ETZ 150
Prod No. 010

FEZ

A pair (2 pieces) new chain flexible tubings for MZ of following models: ETZ125 and ETZ150 for the called vehicles are all chain flexible tubings in the bearing. The flexible tubings are absolutely new, not porous, the best quality. They are admitted in the safety standards authority. Measures: - Total length ca. 410 mm - opening in front ca. 25x46 mm opening behind ca 35x54 mm.

MZ number: 32-25.041

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,40 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 167 products)