Tafel 2 Sattelträger, Schwinge

Attachment strap for panelling to the right of MZ TS 125, 150
Prod No. 2745
Bild Nr.: 5  

Replika

New angle for the attachment of the right page lid suitably for all MZ TS 125 and 150.
MZ number: 13-21.112

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,00 EUR
incl. 19% tax excl. Shipping costs
Collar S MZ MZ ETZ 689 for rocker
Prod No. 2987
Bild Nr.: 10  

Replika

New adjusting nut for bearing pin, suitable for all MZ ETZ 125, 150, 250, 251.

MZ Nummer: 00-70.800

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,84 EUR
incl. 19% tax excl. Shipping costs
Distance bush wing behind MZ ETZ, TS
Prod No. 2164
Bild Nr.: 8  

FEZ

New sleeve for the rear wing suitably with all MZ TS125, TS150, TS250 / 0, TS250 / 1, ETZ125, ETZ150, ETZ250 and ETZ251. Measures: Length approx. 44 mm, inside diameters approx. 18 mm, external diameters approx. 22 mm

MZ number: 13-21.214, 22-21.364

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,00 EUR
incl. 19% tax excl. Shipping costs
Gummibuchse für Schwinge passend für MZ ETS TS ETZ 150 Set
9,20 EUR
incl. 19% tax excl. Shipping costs
Gummibuchse für Schwinge passend für MZ ETS TS ETZ kurz
4,80 EUR
incl. 19% tax excl. Shipping costs
Gummiunterlage Gepäckträger auf Schutzblech MZ ES TS
3,86 EUR
incl. 19% tax excl. Shipping costs
Holder for panelling to the right of MZ TS 125, 150
Prod No. 2738
Bild Nr.: 11  

FEZ

Hold metal sheet for the right page lid suitably for MZ TS125 and TS150.
MZ number: 13-21.164

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,00 EUR
incl. 19% tax excl. Shipping costs
Kugelschmierkopf A6 Schmiernippel ALTE Form
Prod No. 7389

Replika

Neues Schmiernippel in der alten Form passend für verschiedene Modelle von MZ und SIMSON AWO. Das Gewinde ist M6. Dieser Kegelschmierkopf ist verzinkt und nach dem Muster des Originalteils gefertigt.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,50 EUR
incl. 19% tax excl. Shipping costs
Lagerbolzen für Schwinge passend für MZ ES ETS TS 125 150 Troll
33,40 EUR
incl. 19% tax excl. Shipping costs
Mutter M18x1,5 Schwingenbolzen MZ ETZ TS
Prod No. 3578
Bild Nr.: 12  

Replika


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,98 EUR
incl. 19% tax excl. Shipping costs
Notched pin 2,5 x5 for type lable and contact tab and MZ SIMSON
Prod No. 2437

Replika

New notched pin for the type sign and the contact flag in the brake cam suitably with all MZ and SIMSON models. Scope of supply 2 pieces.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,65 EUR
incl. 19% tax excl. Shipping costs
Nut set for bolt for swinging fork MZ ETZ, TS, ES
Prod No. 2061
Bild Nr.: 12  

ost2rad

New set for the wrestling attachment suitably with MZ ETZ125, ETZ150, ETZ250, ETZ251, TS125, TS150, TS250 / 0, TS250 / 1 and ES250 / 2 consisting of 3x nut hexagonal M18x1,5 and 2x washer M18. The nuts and disks are galvanised.

MZ number: 94-31.724, 00-18.152

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,20 EUR
incl. 19% tax excl. Shipping costs
O ring, round ring 14x2
Prod No. 2070

FEZ

New sealing ring for the switch shaft with all models MZ.

MZ number: 96.72-602

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,30 EUR
incl. 19% tax excl. Shipping costs
Porter for MZ, ES ETS TS, 125 and 150, 2nd choice
Prod No. 2980

ost2rad

Back carrier, suitable for the following MZ-types: ES 125, ES 150, ETS 125, ETS 150, TS 125 and TS 150. Replica product in original look, chromed and partly covered with rubber. Of course, it is the folding version just like the original! The carrier is silver coated at the attaching metal sheet. Has smll scratches, but no rust, therefore the article has a special price.



DETAIL
Not available
Rear swinging fork MZ, ES125, ES150, TS125, TS150
Prod No. 1756
Bild Nr.: 6  

FEZ

Wing for ES and TS 125 and 150 varnishes black. Including both rubber.

MZ number: 13-21.222

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
70,00 EUR
incl. 19% tax excl. Shipping costs
Reparaturset für Schwinge und Motorlager ETS TS ETZ 125 150
10,81 EUR
incl. 19% tax excl. Shipping costs
Saddle support, untersupport for dual seat, MZ, TS 125, 150
Prod No. 1909
Bild Nr.: 1  
MZA-Artikelnr.:   31013-00M    

DDR Altbestand

Completely drilled bench support for TS125 and TS150, cast aluminium completely worked on.

MZ number: 13-21.189

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
126,84 EUR
incl. 19% tax excl. Shipping costs
Schraubensatz Fahrgestell Sattelträger Schwinge passend für MZ TS 125 150
Prod No. 7497

Replika

Neues Set Schrauben in der Kategorie Fahrgestell - Tafel 2 Sattelträger, Schwinge speziell für MZ TS125 und TS150 bestehend aus 8x Schraube, 2x Federscheibe, 4x Federring, 4x U-Scheibe, 2x K-Scheibe und 6x Mutter, verzinkt.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,20 EUR
incl. 19% tax excl. Shipping costs
Schutzkappe für Schwingenbolzen, passend bei MZ ES ETS TS 125 150
Prod No. 6117
Bild Nr.: 9  

ost2rad

Abdeckscheibe für den Schwingbolzen passend für MZ der Typen ES125, ES150, ETS125, ETS150, TS125 und TS150. Diese Schutzkappe ist verzinkt.
Außendurchmesser 25mm, Innen18,8mm, Höhe 3mm

MZ Nummer:
13-21.132
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,34 EUR
incl. 19% tax excl. Shipping costs
Schwingenbolzen passend ES TS ETS 125,150 Gummigelagert
Prod No. 7530

FEZ

Schwingelagerbolzen, passend für MZ der Typen ES125, ES150, ETS125, ETS150, IWL Troll, bei TS125 und TS150 neue Ausführung mit Gummigelagerten Schwingen. Einsetzbar für vorn und hinten. Nicht verwendbar bei Schwingenbuchse aus Stahl oder Messing. Länge 245mm.
MZ Nr.: 13-21.215
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,00 EUR
incl. 19% tax excl. Shipping costs
Screw with disk for rear suspension struts MZ, on top
Prod No. 1720
Bild Nr.: 16  

Replika

M10 screw with external disk for the attachment of the rear shock absorbers with MZ - models. For the cover of the upper buffer rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Screw with spring washer for rear suspension struts MZ, below
Prod No. 1721
Bild Nr.: 14  

Replika

M10 screw with locking ring for the attachment of the rear shock absorbers with MZ - models. For the cover of the lower buffer rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,65 EUR
incl. 19% tax excl. Shipping costs
Sphere lubrication head
Prod No. 2063
Bild Nr.: 9  

Replika

New lubricating nipple suitably for different models of MZ. The thread is M6. This cone lubrication head is galvanised.

MZ number: 93-74.843

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Type lable MZ blank
Prod No. 1653

FEZ

New type lable for all MZ .This type lable is blank and from aluminium.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
8,50 EUR
incl. 19% tax excl. Shipping costs
Typenschild passend für MZ Modelle einzelne Typen
7,95 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 25 products)