4.5. Clutch

Adjusting plate for clutch MZ 250
Prod No. 1324
Bild Nr.: 1  

Replika

Set disk in the revolution counter cabinet ETZ 250,251/301 TS 250,250/1 ES 175/2,250/2, for coupling setting.

MZ number: 05-41.053

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,20 EUR
incl. 19% tax excl. Shipping costs
Ball bearing 16005 C3, SNH
Prod No. 248
Bild Nr.: 6  

Replika




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Bearing sleeve for clutch pressure piece - crankshaft  MZ 250
Prod No. 1088
Bild Nr.: 2  

Replika

Curve platen for the gears of the abovementioned MZ - models. It concerns a new part, original MZ - production.

MZ number: 05-41.097

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
38,00 EUR
incl. 19% tax excl. Shipping costs
Clutch body MZ 250
Prod No. 1081
Bild Nr.: 13  

Replika

Body for coupling of following models MZ: ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301. For these couplings are all parts in the bearing, look when required here in the shop or by message ask for.

MZ number: 05-44.153

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
36,10 EUR
incl. 19% tax excl. Shipping costs
Connecting piece with spindle nipple
Prod No. 2570
Bild Nr.: 4  

Replika

New connection piece with pull spindle for the coupling suitably with all MZ ES 250, ETS 250, TS 250, ETZ 250 and 251.

MZ number: 05-44.107

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,80 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,90mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.9
Bild Nr.: 22  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.90 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,95mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.95
Bild Nr.: 0  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.95 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 2,0mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-2.0
Bild Nr.: 0  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 2.00 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distanzbolzen der Druckplatte Kupplung passend für MZ 250
Prod No. 7570

ost2rad

Neuer Distanzbolzen in der Kupplungsdruckplatte passend für MZ ES175/0, ES250/0, ES175/1, ES250/1, ES300, ES250/2, ETS250, TS250/0, TS250/1, ETZ250 und ETZ251.
MZ Nr.: 05-44.061
DETAIL
Not available
Driven plate 4 pieces ETZ TS ES 250
Prod No. 374
Bild Nr.: 15  

Replika

4 pieces (set) of steel lamellae for coupling of the models ES175 / 2, ES250 / 2, ETS250, TS250, ETZ250, ETZ251 / 301

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
22,60 EUR
incl. 19% tax excl. Shipping costs
Driving plate (steel) MZ ES, TS, ETZ 250
Prod No. 2185
Bild Nr.: 15  

ost2rad

New outside lamella for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. Price each. For a complete coupling one needs 4 disks.

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,70 EUR
incl. 19% tax excl. Shipping costs
Driving plate ETZ 250,251/301 TS 250,250/1
Prod No. 358
Bild Nr.: 14  

ost2rad

Price is valid for a piece the complete set is illustrated.

MZ number: 05-44.123

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Driving wheel for primary transmission with clutch centre MZ 250
Prod No. 1825
Bild Nr.: 21  

Replika

Double wheel in the coupling of the models ES175, ES250, ETS250, TS250, ETZ250, ETZ251, ETZ301 and all untermodels.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
35,20 EUR
incl. 19% tax excl. Shipping costs
Druckflansch Kupplungskörper passend für MZ TS250/1 ETZ250 ETZ251
44,80 EUR
incl. 19% tax excl. Shipping costs
Fitting is for connection piece with pull spindle MZ 250
Prod No. 2233
Bild Nr.: 5  

Replika

New supporting fitting for the clutch cable suitably with all MZ ETZ250, ETZ251, TS250, TS250 / 1 and ES250 / 2. This fitting is from plastic.

MZ number: 05-44.108

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,90 EUR
incl. 19% tax excl. Shipping costs
Innenlamelle (Kupplungsreibbelag) ETZ 250,251/301 TS 250,250/1 Original
9,00 EUR
incl. 19% tax excl. Shipping costs
Joint washer for clutch cover MZ ETZ 250, 251
Prod No. 2118

Replika

New coupling lid seal suitably for all MZ ETZ250 and ETZ251.

MZ number: 29-41.033

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,00 EUR
incl. 19% tax excl. Shipping costs
Kugellager 16005 SKF - zur Kupplung ETZ250, ETZ251, ETZ301, TS250, TS250/1
Prod No. 11622

MZA-Artikelnr.:   10816    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet:

passend für:

Die Eigenschaften des Lagers sind:

Innendurchmesser:

Außendurchmesser:

Breite:

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl:

Referenzdrehzahl:

Abdichtung: Dichtscheiben aus NBR auf beiden Seiten des Lagers Deckscheiben aus Stahlblech auf beiden Seiten des Lagers

Lagerkäfig:


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,10 EUR
incl. 19% tax excl. Shipping costs
Kugellager 6302 C3 T9 (TN) SKF - Kurbelwelle, li. - ETZ250,ETZ251,ETZ301, TS250,TS250/1
Prod No. 11651

MZA-Artikelnr.:   10807B    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet:

passend für:

Die Eigenschaften des Lagers sind:

Innendurchmesser:

Außendurchmesser:

Breite:

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl:

Referenzdrehzahl:

Abdichtung: Dichtscheiben aus NBR auf beiden Seiten des Lagers Deckscheiben aus Stahlblech auf beiden Seiten des Lagers

Lagerkäfig:


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,40 EUR
incl. 19% tax excl. Shipping costs
Kugellager SKF 6302 C3 SR4- S50 KR51/1 ES TS ETS 250
Prod No. 11617

MZA-Artikelnr.:   10807    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet: 6302 C3

passend für: Lagerbuchse Motor ES 175/0, ES 250/0, ES 175/1, ES 250/1, ES 175/2, ES 250/2, ES 300, TS 250/0, TS 250/1, ETS 250, ETZ 250, ETZ 251, ETZ 301,
und im Getriebe S50, Schwalbe KR51/1, Spatz SR4-1 (Kickstarter), Star SR4-2, Sperber SR4-3 und Habicht SR4-4.
Die Eigenschaften des Lagers sind:

Innendurchmesser: 15mm

Außendurchmesser: 42mm

Breite: 13mm

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl: 38000 Umin

Referenzdrehzahl: 24000 Umin

Abdichtung: keine

Lagerkäfig: Metall
 
 

Simson Nummer: 00111500
MZ Nummer: 93-94.228
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,30 EUR
incl. 19% tax excl. Shipping costs
Kupplung komplett passend für MZ ETZ 250 251 TS 250/1
Prod No. 5151
Bild Nr.: 0  

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
172,00 EUR
incl. 19% tax excl. Shipping costs
Kupplung komplett REGENERIERT passend für MZ ETZ 250 251 TS 250/1
Prod No. 7327

ost2rad

Regenerierte, originale Kupplung passend für MZ ETZ 250, ETZ 251 und TS 250/1. Folgende Teile sind verbaut: Kugellager 16005, Sicherungsbleche, Druckflansch, Druckfedern, Scheiben, Muttern, Kupplungskörper, Innenlamellen, Außenlamellen, Zahnkranz, Druckplatte mit Distanzbolzen. Das Kupplungspaket ist fertig montiert.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
164,90 EUR
incl. 19% tax excl. Shipping costs
Locking plates clutch MZ 250
Prod No. 1279
Bild Nr.: 8  

ost2rad

12 pieces of safety plate for the screws with all couplings of MZ of following models: ES175, ES250 everybody, ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301.

MZ number: 05-44.068

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,30 EUR
incl. 19% tax excl. Shipping costs
Needle bearing 22x26x26 clutch MZ 250
Prod No. 2139
Bild Nr.: 20  
MZA-Artikelnr.:   10825    

MZA

New needle wreath, needle card cage KK 22x26x26 for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. This bearing is two-rowed.

MZ number: 94-02.502

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,50 EUR
incl. 19% tax excl. Shipping costs
Paßhülse Kupplungsdeckel 16mm ES ETS TS ETZ 250
Prod No. 11244

Replika

Neuer Bolzen am Kupplungsdeckel passend für ES 250, ETS 250, TS 250 und ETZ 250. Originalteil.

Durchmesser: 10mm
Länge: 16mm
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,50 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 38 products)