Tafel 5 Hinterradfederung

Adjusting sleeve, left-hand side
Adjusting sleeve, left-hand side
Prod No. 624
Bild Nr.: 3  

ost2rad

Levers for rear suspension unit to shift to the hardness (height). For original suspension struts with TS 250, TS250 / 1 and all ETZ with being outside spring, left page. Material aluminium casting, original, solid implementation. Other parts and springs for these shock absorbers are also in the shop.

MZ number: 30-26.021

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,90 EUR
incl. 19% tax excl. Shipping costs
Adjusting sleeve, right-hand side
Adjusting sleeve, right-hand side
Prod No. 625
Bild Nr.: 0  

Replika

Levers for rear suspension unit to shift to the hardness (height). For original suspension struts with TS 250, TS250 / 1 and all ETZ with being outside spring, right page. Material aluminium casting, original, solid implementation. Other parts and springs for these shock absorbers are also in the shop.

MZ number: 30-26.023

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,50 EUR
incl. 19% tax excl. Shipping costs
Feder Federbein mit außenliegender Feder passend für MZ TS ETZ rot
Feder Federbein mit außenliegender Feder passend für MZ TS ETZ rot
Prod No. 5297
Bild Nr.: 4  

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
19,90 EUR
incl. 19% tax excl. Shipping costs
Feder Federbein mit außenliegender Feder passend für MZ TS ETZ schwarz
Feder Federbein mit außenliegender Feder passend für MZ TS ETZ schwarz
Prod No. 5298
Bild Nr.: 4  

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
19,90 EUR
incl. 19% tax excl. Shipping costs
Feder für Federbein hinten ES ETS TS ETZ 125 150 mit Schutzhülsen
Feder für Federbein hinten ES ETS TS ETZ 125 150 mit Schutzhülsen
Prod No. 10225

Replika

Neue Druckfeder für hinteres Federbein passend für ES125, ES150, ETS125, ETS150, TS125, TS150, ETZ125 und ETZ150. Passend für Stoßdämpfer hinten mit Chromhülsen. Die Feder ist blank, hat 17 Windungen und eine Gesamtlänge von ca. 26,5cm.
MZ Nummer: 05-23.081
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
14,60 EUR
incl. 19% tax excl. Shipping costs
Federbeinelement hinten passend für MZ ES ETS TS ETZ Aufnahme Auge
Federbeinelement hinten passend für MZ ES ETS TS ETZ Aufnahme Auge
Prod No. 5432
Bild Nr.: 1  

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
36,10 EUR
incl. 19% tax excl. Shipping costs
Federbeinelement hinten passend für MZ ES ETS TS ETZ Aufnahme Auge - Deutsche Produktion
Federbeinelement hinten passend für MZ ES ETS TS ETZ Aufnahme Auge - Deutsche Produktion
Prod No. 7321

Replika

Neues Element für Stoßdämpfer hinten passend für MZ ES 125, ES 150, ES 175/2, ES 250/2, ETS 125, ETS 150, ETS 250, TS 125, TS 150, TS 250, TS 250/1, ETZ 125, ETZ 150 und ETZ 250. Auch passend für Seitenwagen Superelastik. Die Aufnahme ist oben und unten Auge. Deutsche Produktion. Lieferung inkl. Silentgummi und Hülse unten 
MZ Nummer: 93-70.454
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
37,60 EUR
incl. 19% tax excl. Shipping costs
Filzring Federbeinabdichtung passend für MZ, Simson, IWL
Filzring Federbeinabdichtung passend für MZ, Simson, IWL
Prod No. 7368

FEZ

Neuer Filzring zur Staubabdichtung passen für folgende Typen ES125, ES150, ETS125, ETS150, TS125, TS150, ES175/0, ES250/0, ES300, ES175/1, ES250/1, ES175/2, ES250/2 ETS250, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301,IWL Troll, Simson S51 und SR50. Die Maße sind 10x19x4mm.
MZ Nr.: 05-23.074
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,30 EUR
incl. 19% tax excl. Shipping costs
Gummibuchse Schwingenlagerung passend für MZ ETS TS ETZ
Gummibuchse Schwingenlagerung passend für MZ ETS TS ETZ
Prod No. 7266

Replika

Neue Gummibuchse für Schwinge passend für MZ ETS125, ETS150, TS125, TS150, ETZ125, ETZ150, TS250, TS250/1, ETZ250, ETZ251 und ETZ301. Originalteil mit Lagerspuren. Abmaße: außen ca. 27mm, innen ca. 19mm, Länge ca. 25mm
MZ Nummer: 13-21.225
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,30 EUR
incl. 19% tax excl. Shipping costs
Inner dirt shield chrome for suspension MZ ES
Inner dirt shield chrome for suspension MZ ES
Prod No. 2196
Bild Nr.: 7  

FEZ

Below new protective shell chromium-plates suitably for all shock absorbers MZ with edge. To the fixation 3 holes are bored only on top. Good quality. Length ca. 130 mm, inside diameters below ca. 36 mm, inside diameters on top ca. 57 mm, external diameters ca. 58 mm

MZ number: 16-23.010

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,30 EUR
incl. 19% tax excl. Shipping costs
Kleine Chromhülse SWH, oben, h= ca. 15mm
Kleine Chromhülse SWH, oben, h= ca. 15mm
Prod No. 8097

MZA-Artikelnr.:   10455B    

MZA


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,10 EUR
incl. 19% tax excl. Shipping costs
Ornamental sleeves suspension unit MZ, 25 mm high
Ornamental sleeves suspension unit MZ, 25 mm high
Prod No. 630

MZA-Artikelnr.:   10455A    

MZA

1 pair of ornamental sleeves for all normal suspension struts TS and ETZ with being outside spring. Height ca. 25 mm, chromium-plates. More fantastically optical end on top in the shock absorber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
8,50 EUR
incl. 19% tax excl. Shipping costs
Outer dirt shield chrome for suspension MZ ES
Outer dirt shield chrome for suspension MZ ES
Prod No. 2197
Bild Nr.: 9  

ost2rad

New protective shell on top chromium-plates suitably for all shock absorbers MZ with edge. The shell is clamped on top by the half bowls. Good quality. Length ca. 135 mm, inside diameters below ca. 62 mm, inside diameters on top ca. 38 mm, external diameters ca. 63 mm

MZ number: 05-23.025

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,30 EUR
incl. 19% tax excl. Shipping costs
Protective tube for rear suspension MZ ETZ, TS
Protective tube for rear suspension MZ ETZ, TS
Prod No. 2369
Bild Nr.: 6  

ost2rad

New black plastic sleeve for rear shock absorber suitably with all MZ ETZ125, ETZ150, ETZ250, ETZ251 and TS125, TS150, TS250. The sleeve sits under the chrome spring.
MZ number: 13-23.046

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,00 EUR
incl. 19% tax excl. Shipping costs
Rubber sleeve for suspension unit on top MZ
Rubber sleeve for suspension unit on top MZ
Prod No. 1374
Bild Nr.: 11  

Replika

Elastic buffer for the upper ring holder with MZ suspension struts. Fits to almost all models, inside diameters 16 mm.

MZ number: 05-23.161

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,90 EUR
incl. 19% tax excl. Shipping costs
Rubber sleeve for suspension unit on top, diameter 10 mm
Rubber sleeve for suspension unit on top, diameter 10 mm
Prod No. 1026

ost2rad

New rubber for the upper eye of the shock absorber incl. metal pipe with diameter 10 mm. Suitably to all MZ suspension struts offered by us.
Outside dimension: For drillings in the suspension strut of 25 - 28 mm.
Width ca. 17 mm

MZ number: 05-23.161

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,10 EUR
incl. 19% tax excl. Shipping costs
Satz Schutzhülsen Federbeine passend für MZ und AWO grau
Satz Schutzhülsen Federbeine passend für MZ und AWO grau
Prod No. 5690

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
43,40 EUR
incl. 19% tax excl. Shipping costs
Schraubensatz Fahrgestell Hinterradfederung passend für MZ TS 125 150
Schraubensatz Fahrgestell Hinterradfederung passend für MZ TS 125 150
Prod No. 10136

ost2rad

Neues Set Schrauben in der Kategorie Fahrgestell - Tafel 5 Hinterradfederung speziell für MZ TS125 und TS150 bestehend aus 6x Schraube, 4x Unterlegscheibe und 2x Federring, verzinkt.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,80 EUR
incl. 19% tax excl. Shipping costs
Schutzhülse Federbein Set passend für MZ ES ETS TS gebördelt
Schutzhülse Federbein Set passend für MZ ES ETS TS gebördelt
Prod No. 5990

Replika

2 Stück Chromhülsen für Stoßdämpfer, passend für MZ Typen ES, ETS und TS mit 125, 150, 175 und 250 ccm, für vorn und hinten. Diese Ausführung ist gebördelt, nicht mit Befestigungsschrauben. Dieser Satz ist für ein Stück Federbein, bestehend aus oberer und unterer Hülse und Distanzring. Gute Qualität, Beschichtung mit Kupfer - Nickel - Chrom.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
20,30 EUR
incl. 19% tax excl. Shipping costs
Screw with disk for rear suspension struts MZ, on top
Screw with disk for rear suspension struts MZ, on top
Prod No. 1720
Bild Nr.: 0  

Replika

M10 screw with external disk for the attachment of the rear shock absorbers with MZ - models. For the cover of the upper buffer rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Screw with spring washer for rear suspension struts MZ, below
Screw with spring washer for rear suspension struts MZ, below
Prod No. 1721
Bild Nr.: 0  

Replika

M10 screw with locking ring for the attachment of the rear shock absorbers with MZ - models. For the cover of the lower buffer rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,65 EUR
incl. 19% tax excl. Shipping costs
Shock absorber - oil, fork oil MZ and Simson
Shock absorber - oil, fork oil MZ and Simson
Prod No. 030

FEZ




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,70 EUR
18,50 EUR per litre
incl. 19% tax excl. Shipping costs
Shock Oil Addinol 1 litre
Shock Oil Addinol 1 litre
Prod No. 1071

ost2rad




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,20 EUR
6,20 EUR per litre
incl. 19% tax excl. Shipping costs
Spacer sleeves for chrome strut MZ
Spacer sleeves for chrome strut MZ
Prod No. 3061
Bild Nr.: 8  

ost2rad

Distance ring, suitable for all rear dampers with chrome sleeve of MZ. The ring serves as spacer between the upper and the lower protective sleeve.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,80 EUR
incl. 19% tax excl. Shipping costs
Spring for suspension unit MZ, pair, TS and ETZ chromium-plates
Spring for suspension unit MZ, pair, TS and ETZ chromium-plates
Prod No. 1102
Bild Nr.: 4  

ost2rad

2 pieces of being outside springs for shock absorber, suitably to all models ETZ125/150/250 and TS250. The springs are outside bright lustre knives and inside matt-chromium-plated. Diameter outside 57 mm, wire strength 7 mm, therefore about 10% harder than original. Sales Only in pairs.

MZ number: 32-26.003

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
22,00 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 33 products)