Tafel 18 Motor Kupplung

Scheibe Druckfeder Kupplung passend für MZ ES ETS TS ETZ 250
0,80 EUR
incl. 19% tax excl. Shipping costs
Spring for clutch MZ250 increasingly
Prod No. 1159
Bild Nr.: 9  

ost2rad

Special spring for the couplings all MZ - 250th models. This spring was developed for sports couplings, however, is applicable also to the better separation of the disks with the standard machines. The spring tension is raised compared with the standard spring about 15%. German production.

MZ number: 05-44.126

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,80 EUR
incl. 19% tax excl. Shipping costs
Spring plate clutch MZ 250
Prod No. 1795
Bild Nr.: 23  

ost2rad

New spring washer for the coupling suitably with all MZ ES175 / 2, ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251.

MZ number: 05-44.074

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Distanzbolzen der Druckplatte Kupplung passend für MZ 250
Prod No. 7570

ost2rad

Neuer Distanzbolzen in der Kupplungsdruckplatte passend für MZ ES175/0, ES250/0, ES175/1, ES250/1, ES300, ES250/2, ETS250, TS250/0, TS250/1, ETZ250 und ETZ251.
MZ Nr.: 05-44.061
DETAIL
Not available
Paßhülse Kupplungsdeckel 16mm ES ETS TS ETZ 250
Prod No. 11244

Replika

Neuer Bolzen am Kupplungsdeckel passend für ES 250, ETS 250, TS 250 und ETZ 250. Originalteil.

Durchmesser: 10mm
Länge: 16mm
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,50 EUR
incl. 19% tax excl. Shipping costs
Stop disk coupling body MZ 250 ES, TS, ETZ
Prod No. 2763
Bild Nr.: 24  

Replika

New disk for the coupling between coupling package and impeller with internal catch (double wheel) suitably for MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250, ETZ251.

MZ number: 05-44.138

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,90 EUR
incl. 19% tax excl. Shipping costs
Driving plate ETZ 250,251/301 TS 250,250/1
Prod No. 358
Bild Nr.: 1  

Replika

Price is valid for a piece the complete set is illustrated.

MZ number: 05-44.123

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,90mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.9

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.90 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,95mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.95

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.95 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 2,0mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-2.0

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 2.00 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Fitting is for connection piece with pull spindle MZ 250
Prod No. 2233
Bild Nr.: 21  

Replika

New supporting fitting for the clutch cable suitably with all MZ ETZ250, ETZ251, TS250, TS250 / 1 and ES250 / 2. This fitting is from plastic.

MZ number: 05-44.108

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,90 EUR
incl. 19% tax excl. Shipping costs
Kugellager SKF 6302 C3 SR4- S50 KR51/1 ES TS ETS 250
NEW
Prod No. 11617

MZA-Artikelnr.:   10807    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet: 6302 C3

passend für: Lagerbuchse Motor ES 175/0, ES 250/0, ES 175/1, ES 250/1, ES 175/2, ES 250/2, ES 300, TS 250/0, TS 250/1, ETS 250, ETZ 250, ETZ 251, ETZ 301,
und im Getriebe S50, Schwalbe KR51/1, Spatz SR4-1 (Kickstarter), Star SR4-2, Sperber SR4-3 und Habicht SR4-4.
Die Eigenschaften des Lagers sind:

Innendurchmesser: 15mm

Außendurchmesser: 42mm

Breite: 13mm

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl: 38000 Umin

Referenzdrehzahl: 24000 Umin

Abdichtung: keine

Lagerkäfig: Metall
 
 

Simson Nummer: 00111500
MZ Nummer: 93-94.228
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,30 EUR
incl. 19% tax excl. Shipping costs
Needle bearing 22x26x26 clutch MZ 250
Prod No. 2139

MZA-Artikelnr.:   10825    

MZA

New needle wreath, needle card cage KK 22x26x26 for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. This bearing is two-rowed.

MZ number: 94-02.502

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,50 EUR
incl. 19% tax excl. Shipping costs
Driving plate (steel) MZ ES, TS, ETZ 250
Prod No. 2185
Bild Nr.: 2  

ost2rad

New outside lamella for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. Price each. For a complete coupling one needs 4 disks.

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,70 EUR
incl. 19% tax excl. Shipping costs
Spring for clutch MZ 250
Prod No. 375
Bild Nr.: 9  

ost2rad

6 pieces of coupling springs for ES175 / 2, ES250 / 2, ETS250, TS250, ETZ 250/251/301 and TS250 / 1.

MZ number: 5-44.126

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,00 EUR
incl. 19% tax excl. Shipping costs
Kugellager 6302 C3 T9 (TN) SKF - Kurbelwelle, li. - ETZ250,ETZ251,ETZ301, TS250,TS250/1
NEW
Prod No. 11651

MZA-Artikelnr.:   10807B    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet:

passend für:

Die Eigenschaften des Lagers sind:

Innendurchmesser:

Außendurchmesser:

Breite:

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl:

Referenzdrehzahl:

Abdichtung: Dichtscheiben aus NBR auf beiden Seiten des Lagers Deckscheiben aus Stahlblech auf beiden Seiten des Lagers

Lagerkäfig:


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,35 EUR
incl. 19% tax excl. Shipping costs
Transmission oil SAE80 of Addinol
6,90 EUR
6,90 EUR per litre
incl. 19% tax excl. Shipping costs
Connecting piece with spindle nipple
Prod No. 2570
Bild Nr.: 13  

Replika

New connection piece with pull spindle for the coupling suitably with all MZ ES 250, ETS 250, TS 250, ETZ 250 and 251.

MZ number: 05-44.107

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,80 EUR
incl. 19% tax excl. Shipping costs
51 106 axial ball, thrust bearing coupling
8,60 EUR
incl. 19% tax excl. Shipping costs
Locking plates clutch MZ 250
Prod No. 1279
Bild Nr.: 8  

ost2rad

12 pieces of safety plate for the screws with all couplings of MZ of following models: ES175, ES250 everybody, ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301.

MZ number: 05-44.068

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,30 EUR
incl. 19% tax excl. Shipping costs
Housing for control cable MZ 250
Prod No. 2234
Bild Nr.: 20  

Replika

New cabinet to the absorption of the clutch cable suitably with all ETZ250, ETZ251, TS250 / 0, TS250 / 1 and ES250 / 2nd material: Steel galvanised.

MZ number: 05-44.112

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,20 EUR
incl. 19% tax excl. Shipping costs
Pressure piece with lever for clutch MZ 250
Prod No. 442

ost2rad

New pressure piece for coupling with lever suitably under others for ETZ 250/251 TS of 250th good quality.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,40 EUR
incl. 19% tax excl. Shipping costs
Small parts, repair set clutch MZ 250
Prod No. 1732

ost2rad

This set consists of needle bearing, 2 stop disks (standard measure), washer, nut and fuse disk. Suitably to all MZ - couplings with 175, 250 and 300 cubic centimetres.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,50 EUR
incl. 19% tax excl. Shipping costs
Driven plate 4 pieces ETZ TS ES 250
Prod No. 374
Bild Nr.: 2  

Replika

4 pieces (set) of steel lamellae for coupling of the models ES175 / 2, ES250 / 2, ETS250, TS250, ETZ250, ETZ251 / 301

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
22,60 EUR
incl. 19% tax excl. Shipping costs
Repair set clutch MZ250 29-teilig
Prod No. 712

Replika

29 - piece set to the repair of the couplings with following models: ES175, ES250 (all), ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301. This set consists of 5 pieces Reibbelag (driving plates) and 6 pieces of screws with nut and disk as well as 6 pieces of compression spring. These are the most important wearing parts of this equipment. All the other coupling parts please ask for. The steel lamellae have the order number 374.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
26,80 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 35 products)