Electrical equipment / Lamps / Batteries

10er Pack Zündkerzen ISOLATOR 260
Prod No. 8006

MZA-Artikelnr.:   10278-10    

BERU

10er Vorteilspack Isolator Spezial der Größe ZM 14-260 passend für  BK350, RT125, ES, ETS, TS, ETZ, S50, S51, SR50, S53, Schwalbe KR51/1, KR5/2, SR4-1 Spatz, SR4-2 Star, SR4-3 Sperber, SR4-4 Habicht, SR1, SR2, AWO 425 und alle JAWA und CZ Modelle. Außerdem passend für IWL Roller Berlin, Troll, Wiesel und Pitty.
MZ Nummer: 95-20.122, 05412
SIMSON Nummer: 210720
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
27,30 EUR
incl. 19% tax excl. Shipping costs
1l battery acid
Prod No. 504
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
4,50 EUR per litre
incl. 19% tax excl. Shipping costs
Abblendschalter passend für MZ BK ES 250 RT125/3
Prod No. 7405

FEZ

Neuer Abblendschalter mit verchromter Kappe passend für MZ BK350, ES175/0, ES250/0, ES300, ES250/1, ES175/1 und RT125/3. Ber Schalter wird mit einer Schraube direkt am Lenker befestigt. Ohne Lichthupenknopf.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,50 EUR
incl. 19% tax excl. Shipping costs
Abschaltrelais 12V Powerdynamo passend für ES, TS, ETS, ETZ 125, 150, 250
Prod No. 7658

Replika

Neues Relais passend für alle Powerdynamo Zündung mit 12V passend für ES125, ES150, ES175, ES250, ES300, ES175/1, ES250/1, ES175/2, ES250/2, ETS125, ETS150, ETS250, TS125, TS150, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, IWL-Pitty, IWL-Wiesel, IWL-Berlin und IWL Troll.
MZ Nr.: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
12,50 EUR
incl. 19% tax excl. Shipping costs
Abschaltrelais 6V Powerdynamo passend für IWL, ES, TS, ETS, ETZ 125, 150, 250
Prod No. 7695

Replika

Neues Relais passend für alle Powerdynamo Zündung mit 6V passend für ES125, ES150, ES175, ES250, ES300, ES175/1, ES250/1, ES175/2, ES250/2, ETS125, ETS150, ETS250, TS125, TS150, TS250/0, TS250/1, IWL-Pitty, IWL-Wiesel, IWL-Berlin und IWL Troll.
MZ Nr.: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
24,80 EUR
incl. 19% tax excl. Shipping costs
Acceptor / sensor for postprepared Vape MZ ETZ
Prod No. 134925

Replika

Acceptor / sensor for all postprepared Vape-Ignition with MZ ETZ-models. This article suits for our order number 823.

MZ number: A-S01

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
23,80 EUR
incl. 19% tax excl. Shipping costs
Active protection cap for ignition coil, all MZ
Prod No. 3319

Replika

Cap for the protection by hose water, suitably with all MZ with being outside ignition coil, serially with TS250 built-in.

MZ Nummer:
22-34.212

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
13,40 EUR
incl. 19% tax excl. Shipping costs
Adapterplatte Powerdynamo passend für ES, TS, ETS 125, 150 und AWO
Prod No. 7628

Replika

Neue Adapterplatte für Powerdynamo Zündungen der Typen ES125, ES150, ETS125, ETS150, TS125, TS150, AWO-Touren und AWO-Sport. Die Platte dient zur Arretierung des Stators im Motorgehäuse. Für 6V und 12V geeignet.
MZ Nummer.: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
Weight: 0,6 kg per piece
18,70 EUR
incl. 19% tax excl. Shipping costs
Adapterplatte Powerdynamo passend für IWL, RT
Prod No. 7622

Replika

Neue Adapterplatte für Powerdynamo Zündungen der Typen IWL Pitty, Wiesel, Berlin, Troll. Außerdem passt die Platte bei RT125. Die Platte dient zur Arretierung des Stators im Motorgehäuse. Für 6V und 12V geeignet.
MZ Nummer.: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
28,00 EUR
incl. 19% tax excl. Shipping costs
ADDINOL electrical contact spray, 200 ml
4,80 EUR
24,00 EUR per litre
incl. 19% tax excl. Shipping costs
ADDINOL oil-filled pen with BLUE breaker oil, 12ml
Prod No. 1943

MZA-Artikelnr.:   84098A    

MZA




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,70 EUR
558,33 EUR per litre
incl. 19% tax excl. Shipping costs
Adjusting plate for alternator MZ ETZ
Prod No. 2652

FEZ

New baseplate for the generator suitably for all MZ ETZ 125, 150, 250 and 251 with contact breaker ignition. This disk is screwed on the hold cap. On this disk there comes the contact breaker.
MZ number: 00160

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,30 EUR
incl. 19% tax excl. Shipping costs
Alternator for electronic ignition MZ ETZ Vape
Prod No. 823

Replika

Complete kit for MZ with electronic ignition. These parts replace all electronic ignitions of MZ to ca. year of construction in 1994 (also ESE and PVL). As a basis an electronic ignition must already exist. For following models applicable: ETZ125, ETZ150, ETZ250, ETZ251, ETZ301. No mechanical changes must be carried out for the rebuilding. The delivery occurs including detailed instructions. The most modern lighting system, make VAPE. Contents: Sensor, rotor finger, ignition coil, clamps, screws, connecting leads, instructions.



DETAIL
Not available
anchor screw , pullers Lima MZ
Prod No. 1148
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,40 EUR
incl. 19% tax excl. Shipping costs
Backup set, fuse MZ
Prod No. 779

ost2rad

9-part set for all MZ types with round fusible plugs. 3 pieces of each 5A, 8A and 16A. Suitable for almost all MZ types. Made of ceramics, excellent quality.





DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,90 EUR
incl. 19% tax excl. Shipping costs
Batterie Leergehäuse passend für MZ AWO IWL BK RT EMW
Prod No. 6059

FEZ

Leeres Gehäuse für außenliegende Batterien, wie diese an vielen Oldtimern verbaut waren, wie RT125, EMW, IWL Rollern, BMW oder BK350. Dieses Gehäuse ist haupsächlich geeignet wenn Batterien mit moderner Optik und Leistung eingesetzt werden, wie Gel- Batterien. Das Batteriegehäuse wird mit Deckel geliefert.
Maße außen: Höhe 165 mm, Breite 90x80 mm
Maße innen: Höhe 155 mm, Breite 82,73 mm
Alle Maße inkl. Deckel.
Material: Sehr fester Spezialkunststoff, witterungsfest



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
28,00 EUR
incl. 19% tax excl. Shipping costs
Batterie- und Säureschutzfett grün 100ml
8,40 EUR
84,00 EUR per litre
incl. 19% tax excl. Shipping costs
Batteriebefestigung passend für MZ ES ETS 175 250 300, Einschweissteil
Prod No. 6172

Replika

Neue Batteriehalterung, passend für MZ ES 175/1, ES 250/1, ES 175/2, ES 250/2, ES 300 und ETS 250.
Es handelt sich um ein stabiles Stahlblech mit Aufschweißmutter, Größe der Grundfläche ca. 122x64 mm. Die Halterung muss an den Rahmen angeschweißt werden, alternativ auch angeschraubt (Vorsicht beim Bohren, der Rahmen darf nicht beschädigt werden!).
Die Lieferung erfolgt inkl. Batteriespannband.
Deutsche Produktion.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
30,00 EUR
incl. 19% tax excl. Shipping costs
Battery 12V 5A for MZ and Simson
Prod No. 345

FEZ

Battery, for all Simson and MZ with 12 V of technology, Original measures SR50, SR80, but also for all the other models suitable. Name: Sotex 12N5-3B power 5A measures ca.: W/H/T 125/130/60 mm incl. Acid stack, overflow flexible tubing, stick and instructions.

MZ number: 95-83.856

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
23,60 EUR
incl. 19% tax excl. Shipping costs
Battery 12V 9A , MZ / ETZ
Prod No. 346

MZA-Artikelnr.:   12032S    

SOTEX

Highly competitive one battery, for MZ with 12V of technology, especially ETZ 250 / 251 / 301, but also for all the other models suitable. Name: Sotex 12N9-4B-1 power 9A !!! Measures ca.: W/H/T 140/140/70 mm incl. Acid stack, overflow flexible tubing, terminals and instructions.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
35,70 EUR
incl. 19% tax excl. Shipping costs
Battery 6V, 11A for Jawa Perak
Prod No. 3382

FEZ

Highly competitive battery for Jawa Perak. Name: Sotex 6N11A-1B power 11A!!! Measures approx.: B/H/T 125/130/60 mm incl. acid stack, overflow flexible tubing, terminals and instructions. Illustration similarly: How reserve to us a spare delivery of another brand. Please fill only the acid in the battery; this battery is charged with it!

Ost2rad.de and all the other distributors of starter batteries are obliged after §10 of the battery law legally by the end user who acquires a starter battery to raise a security at the rate of 7.50 EUR. For this ost2rad.de issues a security voucher to the end user. Hence, our battery prices get on incl. security. End users are obliged legally to return used starter batteries to the shop assistant of the battery or to a municipal collective place.
Return and allowance of the security value:
On account of the danger good order the return of the old battery is not possible in the dispatch. Thats why ost2rad.de offers two possibilities for the allowance of the security value to the end user: With return of the spent battery and the security voucher in the branch, Lichtenauer Straße 10, 08328 Stützengrün, Germany  the security is refunded immediately. Alternatively the end user can deliver the old battery also at a public law collective place, allow to stamp there the security voucher and to these in the ost2rad.de deliver branch or by post with information of the bank connection and address in ost2rad.de send. In both cases the security is refunded for you.






Price incl. security 7.50€

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
18,60 EUR
incl. 19% tax excl. Shipping costs
Battery 6V, 11A for MZ and Simson
Prod No. 344

FEZ

Highly competitive battery for all Simson and MZ with 6V of technology. Name: Sotex 6N11A-1B power 11A!!! Measures ca.: W/H/T 125/130/60 mm incl. Acid stack, overflow flexible tubing, terminals and instructions. Illustration similarly: How reserve to us a spare delivery of another brand.

MZ number: 95-22.044

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
21,50 EUR
incl. 19% tax excl. Shipping costs
Battery support for MZ, all ETZ
Prod No. 061

Replika

Plastic - battery support for all ETZ models.

MZ number: 30-34.083

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
20,80 EUR
incl. 19% tax excl. Shipping costs
Battery-protection spray Addniol, 150ml
5,70 EUR
38,00 EUR per litre
incl. 19% tax excl. Shipping costs
Befestigungsschelle Zündspule, Halteschelle passend für MZ
Prod No. 6161

Replika

Eloxierte Befestigungsschelle, Originalmaße, passend bei fast allen MZ Typen wie ES125, ES150, ES175, ES250, ES300, ES175/2, ES250/2, ETS125, ETS150, ETS250, TS125, TS150, TS250, TS250/1, ETZ125, ETZ150, ETZ250 und ETZ251.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,80 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 311 products)