Tafel 4 Hinterradfederung

Screw with spring washer for rear suspension struts MZ, below
Prod No. 1721

Replika

M10 screw with locking ring for the attachment of the rear shock absorbers with MZ - models. For the cover of the lower buffer rubber.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,65 EUR
incl. 19% tax excl. Shipping costs
Wellendichtring 10x19x7 blau
Prod No. 7367

FEZ

Neuer Wellendichtring in der Größe 10x19x7. Dieser Simmering ist als Abdichtung in allen MZ Federbeinen und teilweise auch bei Simson eingesetzt.Passend für folgende Typen ES125, ES150, ETS125, ETS150, TS125, TS150, ES175/0, ES250/0, ES300, ES175/1, ES250/1, ES175/2, ES250/2 ETS250, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301, IWL Troll, Simson S51 und SR50. Blau.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Filzring Federbeinabdichtung passend für MZ, Simson, IWL
Prod No. 7368

FEZ

Neuer Filzring zur Staubabdichtung passen für folgende Typen ES125, ES150, ETS125, ETS150, TS125, TS150, ES175/0, ES250/0, ES300, ES175/1, ES250/1, ES175/2, ES250/2 ETS250, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301,IWL Troll, Simson S51 und SR50. Die Maße sind 10x19x4mm.
MZ Nr.: 05-23.074
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,20 EUR
incl. 19% tax excl. Shipping costs
Gelenkbuchse Federbein unten passend für MZ ES ETS TS ETZ
Prod No. 7382

FEZ

Neue Hülse für Gummibuchse Stoßdämpfer unten passend für MZ ES 175/2, ES 250/2, ETS 250, TS 250/0, TS 250/1, ETZ 125, ETZ 150, ETZ 250 und ETZ 251. Durchmesser 10mm.
MZ Nummer: 93-70.526
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,30 EUR
incl. 19% tax excl. Shipping costs
Spacer sleeves for chrome strut MZ
Prod No. 3061
Bild Nr.: 4  

ost2rad

Distance ring, suitable for all rear dampers with chrome sleeve of MZ. The ring serves as spacer between the upper and the lower protective sleeve.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,59 EUR
incl. 19% tax excl. Shipping costs
Rubber sleeve for suspension unit on top MZ
Prod No. 1374
Bild Nr.: 8  

FEZ

Elastic buffer for the upper ring holder with MZ suspension struts. Fits to almost all models, inside diameters 16 mm.

MZ number: 05-23.161

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,80 EUR
incl. 19% tax excl. Shipping costs
Wellendichtring 10x19x7 Viton
Prod No. 7366

FEZ

Neuer Wellendichtring in der Größe 10x19x7. Dieser Simmering ist als Abdichtung in allen MZ Federbeinen und teilweise auch bei Simson eingesetzt.Passend für folgende Typen ES125, ES150, ETS125, ETS150, TS125, TS150, ES175/0, ES250/0, ES300, ES175/1, ES250/1, ES175/2, ES250/2 ETS250, TS250/0, TS250/1, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301,IWL Troll, Simson S51 und SR50. Material Viton.
MZ Nr.: 80-60.016
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,40 EUR
incl. 19% tax excl. Shipping costs
Washer chrome threaded plug strut MZ ES250/1/2
Prod No. 3027
Bild Nr.: 10  

Replika

New U-shaped disk for thread plug for the attachment of the strut, suitable foe all MZ ES 250/0, ES 250/1 und ES 250/2. The disk is chrom-plated.

MZ Nummer: 00-18.141

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,50 EUR
incl. 19% tax excl. Shipping costs
Gummipuffer Federbein unten passend für MZ ES ETS TS ETZ
Prod No. 7381

FEZ

Neuer Gummi für Stoßdämpfer unten passend für MZ ES 175/2, ES 250/2, ETS 250, TS 250/0, TS 250/1, ETZ 125, ETZ 150, ETZ 250 und ETZ 251.
MZ Nummer: 93-70.487
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,60 EUR
incl. 19% tax excl. Shipping costs
Sealing ring for wheel bearing 6302 MZ
Prod No. 3029

Replika

New sealing ring to cover the open ball bearing, suitable for all MZ types. Usually only closed bearings are offered, for closed bearings the sealing ring is not neccessary.

MZ Nummer: 01-24.314

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,80 EUR
incl. 19% tax excl. Shipping costs
Protective tube for rear suspension MZ ETZ, TS
Prod No. 2369

FEZ

New black plastic sleeve for rear shock absorber suitably with all MZ ETZ125, ETZ150, ETZ250, ETZ251 and TS125, TS150, TS250. The sleeve sits under the chrome spring.
MZ number: 13-23.046

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,80 EUR
incl. 19% tax excl. Shipping costs
Shock absorber - oil, fork oil MZ and Simson
3,86 EUR
19,30 EUR per litre
incl. 19% tax excl. Shipping costs
Rubber sleeve for suspension unit on top, diameter 10 mm
Prod No. 1026

ost2rad

New rubber for the upper eye of the shock absorber incl. metal pipe with diameter 10 mm. Suitably to all MZ suspension struts offered by us.
Outside dimension: For drillings in the suspension strut of 25 - 28 mm.
Width ca. 17 mm

MZ number: 05-23.161

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,90 EUR
incl. 19% tax excl. Shipping costs
Spring retainer one pair suspension MZ
Prod No. 627
Bild Nr.: 7  

ost2rad

2 pieces of supporting ring halves for suspension strut behind, all TS250 and models ETZ. Solid implementation, plastic.

MZ number: 22-26.014

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,28 EUR
incl. 19% tax excl. Shipping costs
Shock Oil Addinol 1 litre
Prod No. 1071
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,91 EUR
5,91 EUR per litre
incl. 19% tax excl. Shipping costs
Thread stopper for the suspension unit attachment MZ ES250 / 1/2 stainless steels polishes
Prod No. 2037
Bild Nr.: 9  

Replika

New screw for the shock absorbers suitably with all MZ ES250 / 0, ES250 / 1 and ES250 / 2. This screw is polished stainless steel and around with two surfaces.

MZ number: 05-23.031

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,00 EUR
incl. 19% tax excl. Shipping costs
Verstellhebel links Federbein passend für MZ ES ETS TS ETZ silber lackiert
7,00 EUR
incl. 19% tax excl. Shipping costs
Thread stopper for the suspension unit attachment MZ ES250 / 1/2 hexagonals chromium-plates
Prod No. 2039
Bild Nr.: 9  

Replika

New screw for the shock absorbers suitably with all MZ ES250 / 0, ES250 / 1 and ES250 / 2. This screw is a hexagonal and is chromium-plated.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,50 EUR
incl. 19% tax excl. Shipping costs
Adjusting sleeve, right-hand side
Prod No. 625

Replika

Levers for rear suspension unit to shift to the hardness (height). For original suspension struts with TS 250, TS250 / 1 and all ETZ with being outside spring, right page. Material aluminium casting, original, solid implementation. Other parts and springs for these shock absorbers are also in the shop.

MZ number: 30-26.023

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,03 EUR
incl. 19% tax excl. Shipping costs
Adjusting sleeve, left-hand side
Prod No. 624

ost2rad

Levers for rear suspension unit to shift to the hardness (height). For original suspension struts with TS 250, TS250 / 1 and all ETZ with being outside spring, left page. Material aluminium casting, original, solid implementation. Other parts and springs for these shock absorbers are also in the shop.

MZ number: 30-26.021

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,45 EUR
incl. 19% tax excl. Shipping costs
Outer dirt shield chrome for suspension MZ ES
Prod No. 2197
Bild Nr.: 6  

ost2rad

New protective shell on top chromium-plates suitably for all shock absorbers MZ with edge. The shell is clamped on top by the half bowls. Good quality. Length ca. 135 mm, inside diameters below ca. 62 mm, inside diameters on top ca. 38 mm, external diameters ca. 63 mm

MZ number: 05-23.025

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,81 EUR
incl. 19% tax excl. Shipping costs
Inner dirt shield chrome for suspension MZ ES
Prod No. 2196
Bild Nr.: 3  

FEZ

Below new protective shell chromium-plates suitably for all shock absorbers MZ with edge. To the fixation 3 holes are bored only on top. Good quality. Length ca. 130 mm, inside diameters below ca. 36 mm, inside diameters on top ca. 57 mm, external diameters ca. 58 mm

MZ number: 16-23.010

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,81 EUR
incl. 19% tax excl. Shipping costs
Lower chrome sleeve for suspension unit ES
Prod No. 1060

MZA-Artikelnr.:   33390    

MZA

New under chrome sleeve flatly, without edges (pipe). To the fixation 3 holes are drilled below and on top in each case. Good quality.

MZ number: 05-82.370

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,34 EUR
incl. 19% tax excl. Shipping costs
Internal spring for shock and ES250 ETS250
Prod No. 1708
Bild Nr.: 5  

Replika




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
13,49 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 38 products)