3.6. Alternator

Unterbrecher Kontakt MZ TS und ETZ Kohle für Lichtmaschine, MZ, TS und ETZ, Paar Bürstendruckfeder 8046.2-222:3 MZ ETZ Bürstenhalter 8046.2-222:1 MZ ETZ Anschlussplatte 8046.2-221 für Haltekappe, Stator MZ ETZ Einstellplatte für Drehstromlichtmaschine MZ ETZ Haltekappe mit Anschußplatte MZ ETZ Kondensator MZ + SIMSON Kondensator MZ + SIMSON Kondensatorschelle MZ und SIMSON Nocken für Lichtmaschine MZ ETZ 8049.1 Zylinderschraube AM 4x16 Zylinderschraube BM 5x50 Zylinderschraube BM 5x50 Zylinderschraube BM 5x50 Zylinderschraube 4x10 Zylinderschraube 4x10 Zylinderschraube 3,5x5 Zylinderschraube 4x12 Zylinderschraube 4x12 Unterbrecher Kontakt MZ TS und ETZ Unterbrecher Kontakt MZ TS und ETZ Schraube M7x80  für Lichtmaschine MZ Federring B5 Federring B5 Federring B4 Federring B4 Federring B4 Halteklammer Kabelhalter Kontaktfahne Federring B3,5 Stromschine Federring B3,5 Rotor Stator Klemmwinkel Unterlegscheibe für Schrauben M4 verzinkt Unterlegscheibe für Schrauben M4 verzinkt Ersatzteilkatalog Lichtmaschine Drehstromlichtmaschine Kondensator Stator MZ ETZ 250
Abzieher Schwungscheibe Vape MZ SIMSON
6,00 EUR
incl. 19% tax excl. Shipping costs
ADDINOL oil-filled pen with BLUE breaker oil, 12ml
Prod No. 1943

MZA-Artikelnr.:   84098A    

MZA




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,60 EUR
550,00 EUR per litre
incl. 19% tax excl. Shipping costs
Adjusting plate for alternator MZ ETZ
Prod No. 2652
Bild Nr.: 10  

FEZ

New baseplate for the generator suitably for all MZ ETZ 125, 150, 250 and 251 with contact breaker ignition. This disk is screwed on the hold cap. On this disk there comes the contact breaker.
MZ number: 00160

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,00 EUR
incl. 19% tax excl. Shipping costs
Alternator for electronic ignition MZ ETZ Vape
Prod No. 823

Replika

Complete kit for MZ with electronic ignition. These parts replace all electronic ignitions of MZ to ca. year of construction in 1994 (also ESE and PVL). As a basis an electronic ignition must already exist. For following models applicable: ETZ125, ETZ150, ETZ250, ETZ251, ETZ301. No mechanical changes must be carried out for the rebuilding. The delivery occurs including detailed instructions. The most modern lighting system, make VAPE. Contents: Sensor, rotor finger, ignition coil, clamps, screws, connecting leads, instructions.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
110,00 EUR
incl. 19% tax excl. Shipping costs
anchor screw , pullers Lima MZ
Prod No. 1148
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,00 EUR
incl. 19% tax excl. Shipping costs
Cams for alternator MZ ETZ 8049.1
Prod No. 1354
Bild Nr.: 17  

FEZ

Cams for all contact breaker ignitions, suitably with all ETZ with unterbreaker.

MZ Nummer: 00291

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,01 EUR
incl. 19% tax excl. Shipping costs
Carbon brush alternator MZ TS and ETZ
Prod No. 225
Bild Nr.: 26  

FEZ

1 piece of cabbage for generators MZ of the models TS and ETZ. Please, follow following tip: There was for all different implementation of Lima MZ and therefore also carbon brush conductors. This implementation is with connection with insulating flexible tubing. The cross section of the brush amounts 5x10 mm. Please, check with yourselves the size, perhaps you must order the brushes with our number 015 or 550.

MZ number: 00275

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,44 EUR
incl. 19% tax excl. Shipping costs
Carbon brush for alternator, MZ, TS and ETZ, a pair
Prod No. 015

FEZ

2 pieces of cabbage for generators MZ of the models TS and ETZ. Please, follow following tip: There was for all different implementation of Lima MZ and therefore also carbon brush conductors. This implementation is with connection with insulating flexible tubing. The cross section of the brush amounts 5x10 mm. Please, check with yourselves the size, perhaps you must order the brushes with our number 225 or 550.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,96 EUR
incl. 19% tax excl. Shipping costs
Clamp for condenser MZ and SIMSON
Prod No. 2385

FEZ

New bell for the condenser suitably with all SIMSON and MZ.

MZ number: 04524

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,58 EUR
incl. 19% tax excl. Shipping costs
Condenser MZ + SIMSON
Prod No. 224
Bild Nr.: 29  
MZA-Artikelnr.:   10156-00S    

MZA

New condenser suitably for all Simson and MZ.

15709

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,84 EUR
incl. 19% tax excl. Shipping costs
Connecting plate 8046.2-221 for stator housing MZ ETZ
Prod No. 2623
Bild Nr.: 9  

FEZ

New connector block for hold cap star gate in the rotary current generator suitably with all MZ ETZ 125, 150, 250 and 251.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,79 EUR
incl. 19% tax excl. Shipping costs
Contact breaker MZ TS and ETZ
Prod No. 012
Bild Nr.: 36  

ost2rad

Consisting of contact with contact disk, felt, locking ring and nut. Completely ready to the installation. For all generators with MZ of the models TS125, TS150, TS250, ETZ125, ETZ150, ETZ250, ETZ251 and ETZ301.

MZ number: 80-50.560

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,90 EUR
incl. 19% tax excl. Shipping costs
Cutt-off relay ignition ELZET12 MZ ETZ ignition system
Prod No. 3458

ost2rad

Cutt-off relay, suitably for MZ, all models ETZ, completely with cable. Of this relay serves for the disconnection of the ignition by the ignition light switch. This part suits for ignition system of the Types ELZET12 with the order number 3402, not suitably for other ignitions.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
26,00 EUR
incl. 19% tax excl. Shipping costs
Elektronische Zündung Powerdynamo/Vape passend für MZ ETZ 125 150 250 251 301
Prod No. 6095

Replika

Komplette vollelektronische Zündung mit intergrierter Lichtmaschine , Lichtleistung 12V Gleichstrom, 180 Watt. Passend für MZ der Typen ETZ125, ETZ150, ETZ250, ETZ251 und ETZ301. Diese Lichtmagnetzündanlage ersetzt komplett die alte Lichtmaschine mit Unterbrecher oder die bisherige el. Zündung. An Ihrem Motorgehäuse müssen keine Veränderungen vorgenommen werden. Die kontaktlose Anlage baut die Stromversorgung innerhalb der Anlage unabhängig auf. Es kann ohne Batterie gefahren werden, dafür ist ein Kondensator und Todschalter (Bestellnummer 4333) erforderlich. Wie empfehlen aber die Anlage mit Batterie zu betreiben, der Strom wird besser geglättet und Spannungsspitzen werden abgebaut. Unsere passende Batterie hat die Artikelnummer 6061. Möchten Sie von Bilux auf Halogen H4 umrüsten benötigen Sie das Reflektorset mit der Artikelnummer 6083.
Geliefert werden folgende Teile:
- Rotor Vape/Powerdynamo
- Stator Vape/Powerdynamo
- Zündspule Vape/Powerdynamo
- Regler Vape/Powerdynamo
- Abschaltrelais Powerdynamo
- Kabel mit Stecker
- Zündkabel / Silikon
- Befestigungsmaterial mit Schraube M7
- Einbauanleitung
- Schaltplan
Es handelt sich um das neue System, mit innenligendem Abnehmer, kein äußerer Sensor mehr nötig.
Wir empfehlen den Einbau durch eine Fachwerkstatt, wird die Anlage falsch angeschlossen kann es zur Zerstörung der elektrischen Bauteile kommen und es erlischt der Garantieanspruch.




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
256,94 EUR
incl. 19% tax excl. Shipping costs
Felt wiper for contact breaker MZ, ES , TS
Prod No. 3139

FEZ

Felt for all generators ES and row TS of MZ.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,40 EUR
incl. 19% tax excl. Shipping costs
Filz passend für Unterbrecher MZ Simson
Prod No. 7550

FEZ

Neuer Filz für Unterbrecher passend für MZ Typen RT 125/3, ES 125, ES 150, ES 175/0, ES 250/0, ES 175/1, ES 250/1, ES 175/2, ES 250/2, ETS 125, ETS 150, ETS 250, TS 125, TS 150, TS 250/0, TS 250/1, ETZ125, ETZ150, ETZ250, ETZ251, Simson SR4-1, SR4-2, SR4-3, SR4-4, KR51/1, KR51/2, S50, S51, SR50, S70, SR80.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,60 EUR
incl. 19% tax excl. Shipping costs
Gummi Kabeldurchführung Steuerteil passend für MZ ETZ
Prod No. 4684

MZA-Artikelnr.:   15553    

MZA


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,31 EUR
incl. 19% tax excl. Shipping costs
Halteklammer Bürstenhalter passend für MZ ETZ
Prod No. 5146
Bild Nr.: 19  23

FEZ


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,98 EUR
incl. 19% tax excl. Shipping costs
Hehagon screw M7 for alternator MZ
Prod No. 3204

MZA-Artikelnr.:   15549-A-M    

Hold screw for rotor, suitably to all generators of MZ, except electronic Lima.
Special manufacture.

MZ Nummer:
94-16.741

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,75 EUR
incl. 19% tax excl. Shipping costs
Hexagon screw M7 for alternator Vape, MZ, ETZ
Prod No. 3205

ost2rad

Hold screw for rotor, suitably with all Vape - generators with MZ, ETZ125, ETZ150, ETZ250, ETZ251



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,34 EUR
incl. 19% tax excl. Shipping costs
Holder for caron brushes 8046.2-222:1 MZ ETZ
Prod No. 2387
Bild Nr.: 24  

Replika

New coal holder from plastic suitably for all MZ ETZ125, ETZ150, ETZ250 and ETZ251 with unterbreaker ignition.

MZ number: 00240

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,50 EUR
incl. 19% tax excl. Shipping costs
Kleinteile Set elektronische Zündung ELZET, MZ ETZ
8,88 EUR
incl. 19% tax excl. Shipping costs
Repair set carbon brush, MZ ETZ
Prod No. 1018

ost2rad

Set to the repair of the brushes for Lima. Suitably with all generators ETZ with unterbreaker ignition. Consisting of holder for carbon brushes with 2 spring for arbon brushes and 2 carbon brushes.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,00 EUR
incl. 19% tax excl. Shipping costs
Rotor alternator, MZ ETZ
Prod No. 319
Bild Nr.: 1  

FEZ

Rotor 8046.2-100 completely with rings for all alternators of the row ETZ, ETZ125, ETZ150, ETZ250, ETZ251.



DETAIL
Not available
Show 1 to 25 (from a total of 41 products)