Tafel 2 Front wheel spring suspension

32mm fork tube, core tube, Holm fork MZ TS, ETS
Prod No. 3030
Bild Nr.: 3  

Replika

New front fork pipe for all MZ with pipes, which have a diameter of 32 mm. Total length approx. 555 mm. Best quality, ground and hard chromium plated. suitable for all MZ ETS 250, ETS 125, ETS 150, TS 125, TS 150, TS 250. Please measure the diameter of the pipe, there were also front fork with a diameter of 35 mm.

MZ Nummer: 22-22.114

DETAIL
Not available
Cover nut telescopic front fork 32mm
Prod No. 1482
Bild Nr.: 4  

ost2rad

New screw plug for the tele-fork with 32 mm. The thread is M27x1.5. This screw is chromium-plated.

MZ number: 19-22.073

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
12,25 EUR
incl. 19% tax excl. Shipping costs
Elastic ring for headlamp holders ETS, TS 32 mm
Prod No. 1142
Bild Nr.: 18  

Replika

Elastic rings for the holders of the lamp with all ETS and TS - to models with 32 mm of fork cross-beam, between headlight holder and telescopic front fork. The price is valid for the illustrated set, 4 pieces. New rubber, not hardly or torn!

MZ number: 19-22.065

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
12,80 EUR
incl. 19% tax excl. Shipping costs
Federstützring für Wellendichtring passend für MZ ETS, TS
Prod No. 7567

ost2rad

Neue Blechscheibe im Gewinderinrring der Telegabel (32mm) passend bei ETS125, ETS150, ETS250, TS250/0, TS125 und TS150.
MZ Nr.:19-22.069
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,30 EUR
incl. 19% tax excl. Shipping costs
Felt ring telescopic front fork MZ ETS TS 125 150 250
Prod No. 3430
Bild Nr.: 14  

ost2rad

Felt ring to the tele fork sealing, suitably for models MZ ETS125, ETS150, ETS250, TS125, TS150, TS250, models with tele-fork cross-beam diameter 32 mm.

MZ Nummer
19-22.060

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,98 EUR
incl. 19% tax excl. Shipping costs
Filzringhalter Telegabel passend für MZ TS ETS 125 150 250
3,65 EUR
incl. 19% tax excl. Shipping costs
Gabelrohr 35mm Führungsrohr Holm Telegabel passend für MZ TS ETZ - Altbestand
Prod No. 7250

MZA-Artikelnr.:   15227-1    

DDR Altbestand

Neues Telegabelrohr passend für alle MZ ETZ 125, ETZ 150, ETZ 250 und ETZ 251. Außerdem passend für die MZ TS 125, TS 150, TS250/1 mit 35mm Telegabel. Gesamtlänge ca. 570 mm. Beste Qualität, geschliffen und hart verchromt. Originalersatzteil mit Lagerspuren.
MZ Nummer: 30-22.044, 22-22.264
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
65,00 EUR
incl. 19% tax excl. Shipping costs
Gewindering Telegabel 32mm MZ, TS 125 150 250
Prod No. 6399
Bild Nr.: 11  

Replika

Neue, originale Schraube (Gewindemutter) für Befestigung Telegabelholm für MZ, Typen TS125, TS150 und TS250 mit 32mm Holmdurchmesser.

MZ Nummer
22-22.117
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
18,85 EUR
incl. 19% tax excl. Shipping costs
Gleitrohr Telegabel ETS TS 32mm links
Prod No. 3883
Bild Nr.: 1  

Replika


DETAIL
Shippingtime: 1 Week 1 Week
(abroad may vary)
55,00 EUR
incl. 19% tax excl. Shipping costs
Gleitrohr Telegabel ETS TS 32mm rechts
Prod No. 3884
Bild Nr.: 2  

Replika


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
55,00 EUR
incl. 19% tax excl. Shipping costs
Kleinteile Telegabel passend für MZ ETS TS 125 150 250 Satz
28,95 EUR
incl. 19% tax excl. Shipping costs
Lower slide busch for front fork MZ 32mm
Prod No. 2226
Bild Nr.: 6  

ost2rad

New lower slide bush from brass suitably for all MZ, TS, ETS with tele-fork 32 mm. Height approx. 30 mm, external diameters approx. 38 mm, inside diameters approx. 32 mm

MZ number: 19-22.054

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
15,95 EUR
incl. 19% tax excl. Shipping costs
Mutter Steuerkopf Lenker passend für MZ TS 125 150 250 ETZ 125 150 250
5,20 EUR
incl. 19% tax excl. Shipping costs
Oil seal, 32x45x7 Simmering
Prod No. 596
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,72 EUR
incl. 19% tax excl. Shipping costs
Protective cover, bellow f. fork MZ, TS 125, 150, 250 / 0
Prod No. 1691
Bild Nr.: 17  

Replika




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
13,99 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork 32mm
Prod No. 595

Replika

6-part repair set for MZ-tele-forks with 32 mm of cross-beam diameter. These forks were obstructed in all ETS and partially with the TS-models. Please measure the diameter of fork cross-beam, this set is for 32 mm, you find the set for the later forks with 35 mm at the order number 390 and 067. 2 original dust protection caps, 2 wave sealing rings (32x45x7) and 400 ml fork oil belong to the scope of supply. With this set you can recover at a reasonable price your old forks. The oil is ready special oil, do not merge please!



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
16,80 EUR
incl. 19% tax excl. Shipping costs
Scheinwerferhalter Paar MZ TS250 für 32 mm Telegabelholm
Prod No. 6398
Bild Nr.: 19  

Replika

Neue Lampenhalter, rechte und linke Seite für den Scheinwerfer bei Telegabeln mit 32 mm Holmdurchmesser für MZ, Typ TS 250. Es  sind Originalteile mit Lagerspuren, Farben sortiert (muss neu lackiert werden).

MZ Nummer
22-34.007
22-34.008

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
30,00 EUR
incl. 19% tax excl. Shipping costs
Schraubensatz Fahrgestell Telegabel 32mm TS 250
Prod No. 10258

ost2rad

Neues Set Schrauben in der Tafel 2 - Vorderradfederung 32mm speziell für TS250/0 bestehend aus 3x Schraube, 2x Federscheibe und 1x Federring, verzinkt.
MZ Nummer: entfällt
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,20 EUR
incl. 19% tax excl. Shipping costs
Shock absorber - oil, fork oil MZ and Simson
3,86 EUR
19,30 EUR per litre
incl. 19% tax excl. Shipping costs
Shock Oil Addinol 1 litre
Prod No. 1071
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,91 EUR
5,91 EUR per litre
incl. 19% tax excl. Shipping costs
Spring for 32mm forks, TS
Prod No. 1513
Bild Nr.: 16  
MZA-Artikelnr.:   32050-00M    

MZA




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
20,63 EUR
incl. 19% tax excl. Shipping costs
Telescopic gaiter TS250/0
Prod No. 1095
Bild Nr.: 20  
MZA-Artikelnr.:   32059-00M    

MZA

A piece of gaiter for the tele-fork of the TS250 / 0. This implementation fits only for the called model.

MZ number: 22-22.121

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
17,85 EUR
incl. 19% tax excl. Shipping costs
Tellerfeder Telegabel passend für MZ TS 250 ETZ 250 Seitenwagenausführung
5,00 EUR
incl. 19% tax excl. Shipping costs
Upper slide busch for front fork MZ 32mm
Prod No. 2225
Bild Nr.: 10  

Replika

New upper slide bush from brass suitably for all MZ, TS, ETS with tele-fork 32 mm. Height approx. 18 mm, external diameters approx. 38 mm, inside diameters approx. 32 mm
MZ number: 22-22.115

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
15,90 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 25 products)