4.9. Carburettor

Adjuster screw for cover nut BVF (M6x0,75) MZ ETZ
Prod No. 2461
Bild Nr.: 6  

ost2rad

New screw M6 x 0.75 for the carburettor cabinet cap suitably with all MZ ETZ125, ETZ150, ETZ250 and ETZ251 with original carburettor BVF.

MZ number: 94-28.704

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,68 EUR
incl. 19% tax excl. Shipping costs
Adjusting screw oil pump MZ ETZ
Prod No. 2462
Bild Nr.: 6  

Replika

New screw for the oil tank suitably with all MZ ETZ125, ETZ150, ETZ250 and ETZ251 with oil pump.

MZ number: 94-28.704

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,70 EUR
incl. 19% tax excl. Shipping costs
Air adjusting screw BVF 30N 2-5
Prod No. 1340
Bild Nr.: 22  

Replika

Adjusting screw to the idling setting (situation gas) of the carburettors BVF - models 30N-2, 30N-3, 30N-4, 30N-5. These models were seated with the ETZ250 and ETZ251.

MZ number: 80-30.402

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,84 EUR
incl. 19% tax excl. Shipping costs
Carburettor Bing 84/30/110 - A MZ ETZ250/251
Prod No. 064

MZA-Artikelnr.:   16366-00M    

BING

New carburettor Bing for MZ ETZ 250 ETZ251 these carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. The recommended retail price lies with about 146.00 euros. Also as a substitute with carburettor BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85€ you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, for example, to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110, anew, made in Germany - connection Putting in the suction connecting piece to the cylinder, 40 mm - connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle - main nozzle 118 (corresponds to the original with 250 cubic centimetres). Scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear.

MZ number: similar 93-77.653

DETAIL
Not available
Carburettor Bing 84/30/110 MZ ETZ 301
Prod No. 308
Bild Nr.: 1  
MZA-Artikelnr.:   16366-00M    

BING

You offer a new carburettor Bing for MZ, row ETZ 301. These carburettors are produced as a substitute of the genuine parts. In the processing and behaviour these are to the original consider. The carburettor is regulated well and stop. He is delivered ready with installation and preset. Also as a substitute with carburettor BVF. As the only you must change the starter pull. The external casing is too long and must be shortened. For a surcharge of 6.85€ you can coorder such a Bowden cable. The installation is also easy for the "nonexpert" and is uncomplicated. A low consumption and a very easy setting are the biggest advantages of this carburettor. The engine promptly reacts to the smallest change of the settings. Thereby you can seat easily bigger nozzles, for example, to the increase in output. The processing is exemplary and exact. The springs are strong and from the best spring steel. The work-sided opposed float situation please do not change; you can change all the other settings fast, but please only gradually. Technical data: - Bing bar carburettor 84/30/110, anew, made in Germany - connection Putting in the suction connecting piece to the cylinder, 40 mm - connection air filter 52 mm - passage 30 mm - for 1-cylinder 2-cycle scope of supply: - (With it you can reorder carburettor as described, preset - exploded view with spare part list - installation instructions - data sheet and description - unique service number still after years). - 2-year guarantee on material and manufacturers mistake, except wear.

MZ Nummer: 93-77.598

DETAIL
Not available
Dichtscheibe Startkolben Vergaser SIMSON passend für MZ
Prod No. 4749
Bild Nr.: 11  
MZA-Artikelnr.:   10587-A-S    

BVF


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,31 EUR
incl. 19% tax excl. Shipping costs
Druckfeder Startkolben passend für MZ Vergaser BVF
Prod No. 5257
Bild Nr.: 9  

ost2rad


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,80 EUR
incl. 19% tax excl. Shipping costs
Druckfeder Teillastnadel BVF 30N 3-1 passend für MZ ETZ 251
Prod No. 6583
Bild Nr.: 30  
MZA-Artikelnr.:   17137-00M    

BVF

Neue Feder 0,25 x 3,2 x 12x5 für Düsennadel passend für MZ ETZ 251 und 301 mit BVF Vergaser 30N 3-1.
MZ Nummer: 80-30.409

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,52 EUR
incl. 19% tax excl. Shipping costs
Float BVF for MZ
Prod No. 727
Bild Nr.: 18  
MZA-Artikelnr.:   15071-00M    

BVF

New float, suitably for all MZ - carburettor to year of construction in 1994 of the company BVF. Brass solders.

MZ number: 80-30.316, 80-30.392

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,25 EUR
incl. 19% tax excl. Shipping costs
Float needle for Bing 53 / 84
Prod No. 1335

MZA-Artikelnr.:   84403    

BING

Float pin for Bing - carburettor of the row 53 and 84. Suitably for our carburettors Bing for MZ models, all models.

MZ number: ersetzt 80-30.159

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
35,86 EUR
incl. 19% tax excl. Shipping costs
Jet needle BING 84
Prod No. 1338

MZA-Artikelnr.:   84458    

Carburettor needle for Bing - carburettor of the row 84. Suitably for our carburettors Bing for MZ models, all models with 250 or 300 cubic centimetres.

MZ number: ersetzt 80-30.383

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,81 EUR
incl. 19% tax excl. Shipping costs
Jet set BVF MZ
Prod No. 1343

Replika

6-part jet set for the ETZ251 and other models 30 N. Are delivered to axis for floats, idling screw and 3 x main jet. We deliver the sizes of 0.50 mm to 1.60 mm in each case in 0.05 mm - to steps. Please, at the end of the purchase winding up the required sizes inform.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
8,95 EUR
incl. 19% tax excl. Shipping costs
Jet set MZ ETZ 251, 301
Prod No. 134

Replika

7 - piece repair set for carburettor BVF ETZ 251 and ETZ 301.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,95 EUR
incl. 19% tax excl. Shipping costs
Joint washer for carburettor BVF ES, ETS, TS, ETZ 250
Prod No. 1007

FEZ

New tub seal for all 250th, 300th MZ except models with page float carburettor.

MZ number: 80-30.321

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,84 EUR
incl. 19% tax excl. Shipping costs
Klemmfeder zum Schwimmernadelventil Vergaser BING 84 passend für MZ 250
Prod No. 5230

MZA-Artikelnr.:   84456    

BING


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,94 EUR
incl. 19% tax excl. Shipping costs
Main jet BVF MZ
Prod No. 509

MZA-Artikelnr.:   80650-00S    

BVF

Main jet suitably for all carburettors original obstructed in the GDR of the series 24N, 26N, 28N, 30N with the different MZ - models. The nozzle fits in all BVF - carburettor which were inserted with MZ. There are these main nozzles in different sizes (the size delivery there are 1/100 mm). All nozzles have the thread M5.

Please select your size:


Please select your size:
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,70 EUR
incl. 19% tax excl. Shipping costs
Mixing chamber cap BVF carburettor MZ ETZ 250
Prod No. 2591
Bild Nr.: 12  

Replika

New cabinet cap for the carburettor BVF suitably with all MZ ETZ250.

MZ number: 80-30.356

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,00 EUR
incl. 19% tax excl. Shipping costs
Mutter Stellschraube lang Vergaser BVF M6 x 0,75 passend für MZ SIMSON
Prod No. 5187
Bild Nr.: 7  
MZA-Artikelnr.:   11519-00S    

BVF


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,52 EUR
incl. 19% tax excl. Shipping costs
Nadelhalter Teillastnadel BVF 30N 3-1 passend für MZ ETZ 251
Prod No. 6582
Bild Nr.: 32  

FEZ

Neues Halteplättchen für Düsennadel passend für MZ ETZ 251 und 301 mit BVF Vergaser 30N 3-1.

MZ Nummer: 80-30.399

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,50 EUR
incl. 19% tax excl. Shipping costs
Needle jet 70 MZ, TS250, ETZ150, ETZ250
Prod No. 3268

Replika

Needle jet 70, with across drilling, suitably in the GDR BVF carburettor, for all types TS250, TS250 / 1, ETZ125, ETZ150 and ETZ250

MZ number: 80-30.364

DETAIL
Not available
Needle jet for BING 53 / 84
Prod No. 1336

MZA-Artikelnr.:   84452    

BING

Needle nozzle for Bing - carburettor of the row 53 and 84. Suitably for our carburettors Bing for MZ models, all models.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
13,28 EUR
incl. 19% tax excl. Shipping costs
Needle seating complete MZ BVF
Prod No. 1263

FEZ

Float valve, suitably for all MZ - carburettor to year of construction in 1994 of the company BVF. 22N, 24N, 30N carburettor, all untermodels.

MZ number: 80-30.159

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,73 EUR
incl. 19% tax excl. Shipping costs
O ring, round ring 40x2
Prod No. 2074

FEZ

New sealing ring for the carburettor cabinet cap with all MZ ETZ250, ETZ251, TS250.

MZ number: 80-60.205

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,75 EUR
incl. 19% tax excl. Shipping costs
Plunger with rubber plug MZ, SIMSON BVF
Prod No. 1614
Bild Nr.: 10  

ost2rad

Piston for start setup. Choke suitably for all BVF carburettors of MZ (except model with lateral float chamber).

MZ number: 80-30.297

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,52 EUR
incl. 19% tax excl. Shipping costs
Protective cap bowden cable carburettor
Prod No. 257

ost2rad

2 pieces of elastic protection cap for bowden cables in all carburettors.

MZ number: 16-29.017

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,16 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 31 products)