Tafel 3 Vorderradfederung (Teleskopgabel mit Aluminiumgleitrohr)

Anschlagscheibe Führungsrohr Telegabel 35mm passend für MZ TS ETZ
Prod No. 5247
Bild Nr.: 5  
MZA-Artikelnr.:   15228-K-M    


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Clamping clip for telescopic gaiter MZ, ETZ, TS
Prod No. 3203
Bild Nr.: 0  

ost2rad

Clamp bell, instep bell for the gaiter in telescopic front forks with 35 mm of cross-beam diameter. Suitably in MZ, TS and ETZ. Instep area of approx. 37-40 mm.

MZ number: 22-22.298

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,80 EUR
incl. 19% tax excl. Shipping costs
Cover nuts for telescopic front fork ETZ
Prod No. 388

Replika

2 pieces, for all tele-forks ETZ. High-quality, chromium-plated face.

MZ number: 30-22.062

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
11,36 EUR
incl. 19% tax excl. Shipping costs
Elastic ring for headlamp holder TS
Prod No. 1304
Bild Nr.: 22  
MZA-Artikelnr.:   32038    

MZA

Elastic rings for the holders of the lamp with all TS - to models with 35 mm of fork cross-beam, between headlight holder and telescopic front fork. The price is valid for the illustrated set, 4 pieces. New rubber, not hardly or torn!

MZ number: 22-34.240

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
8,79 EUR
incl. 19% tax excl. Shipping costs
Faltenbalg Telegabel passend für MZ ETZ TS Paar 1. Qualität
12,95 EUR
incl. 19% tax excl. Shipping costs
Feather telescopic front fork MZ TS ETZ250, 251 pairs
Prod No. 204

FEZ

2 pieces of main spring, Wire strength 4 mm, 62,5 bends. ETZ 125, 150, 250, 251, 301, TS125, 150, TS 250, Standard feather for all tele-forks MZ with 35 mm cross-beam. Recommended equipment: Repair clause tele-fork MZ (067, 523) and oil for tele-fork (No. 030).

MZ number: 32-22.004

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,00 EUR
incl. 19% tax excl. Shipping costs
Gabelrohr 35mm Führungsrohr Holm Telegabel passend für MZ TS ETZ - Altbestand
Prod No. 7250

MZA-Artikelnr.:   15227-1    

DDR Altbestand

Neues Telegabelrohr passend für alle MZ ETZ 125, ETZ 150, ETZ 250 und ETZ 251. Außerdem passend für die MZ TS 125, TS 150, TS250/1 mit 35mm Telegabel. Gesamtlänge ca. 570 mm. Beste Qualität, geschliffen und hart verchromt. Originalersatzteil mit Lagerspuren.
MZ Nummer: 30-22.044, 22-22.264
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
65,00 EUR
incl. 19% tax excl. Shipping costs
Gleitrohr rechts für Telegabel passend für MZ ETZ TS 35mm
Prod No. 7513

Replika

Neues, linkes Gleitstück für die Holmaufnahme der Telegabeln der Typen ETZ125, ETZ150, ETZ250, ETZ251. Passend auch bei MZ TS 125, TS 150 und TS 250 mit 35mm Telegabel.Es handelt sich um ein originales MZ-Teil, neu, schwarz lackiert (mit Lagerspuren).
MZ Nummer: 22-22.303
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
75,00 EUR
incl. 19% tax excl. Shipping costs
Guide tube 35mm, Fork pipe, cross-beam telescopic front fork MZ
Prod No. 493
Bild Nr.: 3  
MZA-Artikelnr.:   15227    

MZA

New tele fork pipe for all MZ with which this pipe with 35 mm of diameter were obstructed. Total length ca. 570 mm. The best original quality, polished and hardly chromium-plates. For all ETZ - models and all TS250 / 1. With the TS 125, 150 and 250 check please the diameter, there were also thinner forks with 32 mm of diameter.

MZ number: 30-22.044

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
60,00 EUR
incl. 19% tax excl. Shipping costs
Hydraulic damper on the left for telescopic fork MZ, all ETZ
Prod No. 1915
Bild Nr.: 1  

FEZ

Left rostrum for the cross-beam absorption of the tele-forks of the models ETZ125, ETZ150, ETZ250, ETZ251. It concerns an original MZ part, anew, varnishes black (with bearing tracks).

MZ number: 30-22.037

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
75,01 EUR
incl. 19% tax excl. Shipping costs
Lamp holder, headlight holder MZ TS
Prod No. 605
Bild Nr.: 20  21

FEZ

Right and left lamp holder for headlight, all TS - models. Delivery occurs only in pairs. The parts are new and varnished. Indeed, by the age use tracks exist. On inquiry we can deliver these parts also in the original colour shade, indeed, we recommend the parts to varnish anew.

MZ number: 13-22.172, 13-22.173

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
40,00 EUR
incl. 19% tax excl. Shipping costs
Mutter M30x2 Steuerrohr passend für MZ TS ETZ
Prod No. 7252

FEZ

Neue, verzinkte Mutter für den Steuerkopf in der Größe M30 x 2. Passend für MZ TS 125, TS 150, TS 250/0, TS 250/1, ETZ 125, ETZ 150, ETZ 250, ETZ 251 und ETZ 301. Achtung! Nur für BRD-Ausführung. Bitte Gewindesteigung beachten.
MZ Nummer: 22-22.178
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,79 EUR
incl. 19% tax excl. Shipping costs
Oil Seal 35X47X7
Prod No. 265
Bild Nr.: 16  

Replika

1a Qualität


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,90 EUR
incl. 19% tax excl. Shipping costs
Oil sealings telescopic front fork MZ 35mm pair
Prod No. 124
Bild Nr.: 16  

Replika

2 pieces sealing rings for fork, all MZ with 35 mm of fork pipe. Double lip ring 35x47x7. For all models ETZ. With TS measure please the diameter of the cross-beam, older models have 32 mm of diameter, these wave sealing rings have the order number 596.

MZ number: 96-60.375

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,80 EUR
incl. 19% tax excl. Shipping costs
Piston ring Pair of telescopic front fork MZ
Prod No. 1679
Bild Nr.: 11  

ost2rad

New piston rings for the tele-fork suitably for all MZ ETZ and TS with 35 mm of fork.

MZ number: 22-22.274

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,80 EUR
incl. 19% tax excl. Shipping costs
Protective cap telescopic front fork MZ, Pair
Prod No. 361
Bild Nr.: 17  
MZA-Artikelnr.:   15235    

MZA

2 pieces (pair) of protective cap for tele-fork. For all MZ with fork pipe 35 mm and production tele-fork.

MZ number: 22-22.290

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,45 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork MZ all small parts
Prod No. 1677

ost2rad

20-part repair set for all tele-forks of MZ ETZ and TS with 35 mm. In this set all small parts of the tele-fork are included. Consisting of: 2x protective cap, 2x oil seal 35x47x7 (high double lip), 2x supporting washer for final stop, 2x spring for final stop, 2x sealing washer, 2x circlip, 2x throttle valve, 2x valve washer, 2x spring for valve washer and 2x piston ring.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
24,00 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork MZ ETZ, TS with springs
Prod No. 523

ost2rad

Set to the repair of tele-forks. All parts anew, 1st quality. For all tele-forks with 35 mm of MZ, TS 125, TS 150, TS 250/1, ETZ 125, ETZ 150, ETZ 250, ETZ 251. Scope of supply: Set consists from: - 2x Main spring - 2x Cover cap - 2x Throttle valve - 2x Double lip ring - 0,5 l Fork oil The fork oil is ready for filling and must not be merged. It concerns special oil.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
21,85 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork MZ TS, ETZ, Small parts
Prod No. 390

Replika

10 - piece set passes of the most important small parts of the normal tele-forks MZ (35 mm), the models TS and ETZ. Contents: 2 pieces , throttle valve , piston ring , oil seal (Double lip), protwctive cap . These forks became used with all ETZ - models and with the TS250 / 1. With the models TS125, TS150 and TS250 there was during the production a model change of from 32 mm to 35 mm of tele-forks. The suitable special oil has the order number 030. For these forks you need a total of 3 bottles.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
17,90 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork MZ with telescopic gaiter
Prod No. 067

ost2rad

Repair set for the forks all MZ with fork diameter 35 mm (situation kind) of the models TS125 TS150, TS250, ETZ125, ETZ150, ETZ250, ETZ251, ETZ301. Contents: 500-600 ml fork oil, 2 Stück protective cap, 2 Stück valve washer, 2 Stück Double lip ring, 2 Stück telescopic gaiter.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
28,85 EUR
incl. 19% tax excl. Shipping costs
Repair set telescopic front fork MZ, ETZ, TS, completely with telescopic gaiter
Prod No. 1968

Replika

23-part repair set for all tele-forks of MZ, models ETZ125, ETZ150, ETZ250, ETZ251, ETZ301 and TS250 / 1 with 35 mm of fork cross-beam diameter. In this set the most important parts are included for the complete repair of the tele-fork (for both pages).

Consisting of:
 2x Telescopic gaiter, 2x Oil seal 35x47x7 (high double lip), 2x Supporting washer for final stop, 2x Spring for final stop, 2x Sealing washer, 2x Circlip, 2x Throttle valve, 2x Valve washer, 2x Spring for valve washer, 2x Piston ring, 2x Compression spring (not for sidecar operation) and special oil.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
38,00 EUR
incl. 19% tax excl. Shipping costs
Sealing washer telescopic front fork MZ ETZ and TS
Prod No. 1351
Bild Nr.: 14  

ost2rad

A pair of packing washers suitable for all telescopic front fork from MZ with a cross-beam diameter from 35mm.
Therefore for all ETZ models and all TS models with the 35mm fork (older models had a cross-beam diameter of 32 mm, there do not fit these disks).

MZ number: 00-18.210

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,00 EUR
incl. 19% tax excl. Shipping costs
Set of compression springs for telescopic front fork MZ chromium-plates
Prod No. 1680
Bild Nr.: 0  13

Replika

4-part set chromium-plated compression springs for the tele-fork suitably with all MZ ETZ and TS with 35 mm of fork. 2 springs are for the valve disk (22-22.279) and 2 springs are for the end stop (22-22.280).

MZ number: 22-22.279, 22-22.280

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,11 EUR
incl. 19% tax excl. Shipping costs
Shock absorber - oil, fork oil MZ and Simson
3,86 EUR
19,30 EUR per litre
incl. 19% tax excl. Shipping costs
Shock Oil Addinol 1 litre
Prod No. 1071
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,91 EUR
5,91 EUR per litre
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 32 products)