4.5. Clutch

Druckplatte mit Distanzbolzen TS 250/1, ETZ 250/251 Stellplatte für Kupplung MZ ETZ 250 Lagerbuchse Gehäuse - Kurbelwelle MZ 250 Druckstück für Kupplung MZ ETZ 250 Verbindungsstück mit Zugspindel Kupplung MZ ETZ 250 Verbindungsstück mit Zugspindel Kupplung MZ ETZ 250 Kugellager 16005 C3, SNH Druckflansch Sechskantschraube M6 verzinkt Druckfeder für Kupplung MZ ETZ 250 Unterlegscheibe für Schrauben M6 verzinkt Kupplungskörper MZ ETZ 250 Kupplungslamelle (Stahl) MZ ES, TS, ETZ 250 Innenlamelle (Kupplungsreibbelag) ETZ 250,251/301 TS 250,250/1 Zahnkranz Federscheibe Kupplung MZ 250 Anlaufscheibe Kupplungskörper MZ 250 ES, TS, ETZ Nadellager 22x26x26 Kupplung MZ ETZ 250 Antriebsrad mit innerem Mitnehmer für Kupplung MZ 250 Distanzscheibe Anlaufscheibe Sechskantmutter M6 verzinkt Sicherungsbleche Kupplung MZ ETZ 250 Sicherungsbleche Kupplung MZ ETZ 250 Ersatzteilkatalog Kupplung Reibbelag MZ ETZ 250
Adjusting plate for clutch MZ 250
Prod No. 1324
Bild Nr.: 1  

Replika

Set disk in the revolution counter cabinet ETZ 250,251/301 TS 250,250/1 ES 175/2,250/2, for coupling setting.

MZ number: 05-41.053

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,20 EUR
incl. 19% tax excl. Shipping costs
Ball bearing 16005 C3, SNH
Prod No. 248
Bild Nr.: 6  

Replika




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Bearing set MZ ETZ 251 / 301
Prod No. 330

Replika

Bearing set for engine and gearbox for MZ, the models ETZ250, ETZ251, ETZ301. All bearings of course anew and the best quality. These ball bearings are produced no cheap products and especially for the construction of vehicles. Different brands are offered, models are seated like DKFL, SKF, SNH, CBF.These are selected carefully which quality (tolerance) is either C3 or C4. We select the bearings and follow with the fact which concerns it with the repair around older engines, accordingly the play is considered, so that these do not become hot and solidly go. Besides, we can fall back on our own, multiple experiences. This set consists of 10 pieces of bearings, of it 8 deep groove ball bearings incl. crankshaft bearing and 2 needle bearings for connecting rod, this are most important in the engine and gear. Following models in detail: 1x 6204, 2x 6203, 1x 6304, 1x 16005, 2x 6306, 1x 6302, 1x 18x22x24, 1x 22x26x26. In this connection we would like to draw the attention to the fact which we overtake in our workshop also engines, freshly camp down and seal. When required you ask for please without obligations; we also organise the transport of the engines. Furthermore rebuilt engines are available! Recommended accessories for this ball bearing - set: Thick set (seals and sealing rings) and engine oil, both also here in the shop!



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
36,00 EUR
incl. 19% tax excl. Shipping costs
Bearing sleeve for clutch pressure piece - crankshaft  MZ 250
Prod No. 1088
Bild Nr.: 2  

Replika

Curve platen for the gears of the abovementioned MZ - models. It concerns a new part, original MZ - production.

MZ number: 05-41.097

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
34,00 EUR
incl. 19% tax excl. Shipping costs
Clutch body MZ 250
Prod No. 1081
Bild Nr.: 13  

Replika

Body for coupling of following models MZ: ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301. For these couplings are all parts in the bearing, look when required here in the shop or by message ask for.

MZ number: 05-44.153

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
36,10 EUR
incl. 19% tax excl. Shipping costs
Connecting piece with spindle nipple
Prod No. 2570
Bild Nr.: 4  

Replika

New connection piece with pull spindle for the coupling suitably with all MZ ES 250, ETS 250, TS 250, ETZ 250 and 251.

MZ number: 05-44.107

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,80 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,90mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.9
Bild Nr.: 22  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.90 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 1,95mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-1.95
Bild Nr.: 22  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 1.95 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distance plate 2,0mm clutch MZ ES, TS, ETZ 250
Prod No. 2764-2.0
Bild Nr.: 22  

Replika

New disc for the coupling suitably with all MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250 and ETZ251. This disc sits behind the driving wheel with internal cotaker (double wheel). There is this distance disc in 3 different strengths. This is 2.00 mm thick.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,60 EUR
incl. 19% tax excl. Shipping costs
Distanzbolzen der Druckplatte Kupplung passend für MZ 250
Prod No. 7570

ost2rad

Neuer Distanzbolzen in der Kupplungsdruckplatte passend für MZ ES175/0, ES250/0, ES175/1, ES250/1, ES300, ES250/2, ETS250, TS250/0, TS250/1, ETZ250 und ETZ251.
MZ Nr.: 05-44.061
DETAIL
Not available
Driven plate 4 pieces ETZ TS ES 250
Prod No. 374
Bild Nr.: 15  

Replika

4 pieces (set) of steel lamellae for coupling of the models ES175 / 2, ES250 / 2, ETS250, TS250, ETZ250, ETZ251 / 301

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
22,60 EUR
incl. 19% tax excl. Shipping costs
Driving plate (steel) MZ ES, TS, ETZ 250
Prod No. 2185
Bild Nr.: 15  

ost2rad

New outside lamella for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. Price each. For a complete coupling one needs 4 disks.

MZ number: 05-44.125

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,70 EUR
incl. 19% tax excl. Shipping costs
Driving plate ETZ 250,251/301 TS 250,250/1
Prod No. 358
Bild Nr.: 14  

Replika

Price is valid for a piece the complete set is illustrated.

MZ number: 05-44.123

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Driving wheel for primary transmission with clutch centre MZ 250
Prod No. 1825
Bild Nr.: 21  

Replika

Double wheel in the coupling of the models ES175, ES250, ETS250, TS250, ETZ250, ETZ251, ETZ301 and all untermodels.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
35,20 EUR
incl. 19% tax excl. Shipping costs
Druckflansch Kupplungskörper passend für MZ TS250/1 ETZ250 ETZ251
44,80 EUR
incl. 19% tax excl. Shipping costs
Fitting is for connection piece with pull spindle MZ 250
Prod No. 2233
Bild Nr.: 5  

Replika

New supporting fitting for the clutch cable suitably with all MZ ETZ250, ETZ251, TS250, TS250 / 1 and ES250 / 2. This fitting is from plastic.

MZ number: 05-44.108

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,90 EUR
incl. 19% tax excl. Shipping costs
Hexagon screw M6, galvanized
Prod No. 1427

Replika

Galvanised hexagon bolts after German industrial standard, metrical thread M6.

Please, for the choice of the length click on the picture:

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,08 EUR
incl. 19% tax excl. Shipping costs
Innenlamelle (Kupplungsreibbelag) ETZ 250,251/301 TS 250,250/1 Original
9,00 EUR
incl. 19% tax excl. Shipping costs
Kugellager 16005 SKF - zur Kupplung ETZ250, ETZ251, ETZ301, TS250, TS250/1
NEW
Prod No. 11622

MZA-Artikelnr.:   10816    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet:

passend für:

Die Eigenschaften des Lagers sind:

Innendurchmesser:

Außendurchmesser:

Breite:

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl:

Referenzdrehzahl:

Abdichtung: Dichtscheiben aus NBR auf beiden Seiten des Lagers Deckscheiben aus Stahlblech auf beiden Seiten des Lagers

Lagerkäfig:


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
7,09 EUR
incl. 19% tax excl. Shipping costs
Kugellager 6302 C3 T9 (TN) SKF - Kurbelwelle, li. - ETZ250,ETZ251,ETZ301, TS250,TS250/1
NEW
Prod No. 11651

MZA-Artikelnr.:   10807B    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet:

passend für:

Die Eigenschaften des Lagers sind:

Innendurchmesser:

Außendurchmesser:

Breite:

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl:

Referenzdrehzahl:

Abdichtung: Dichtscheiben aus NBR auf beiden Seiten des Lagers Deckscheiben aus Stahlblech auf beiden Seiten des Lagers

Lagerkäfig:


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,35 EUR
incl. 19% tax excl. Shipping costs
Kugellager SKF 6302 C3 SR4- S50 KR51/1 ES TS ETS 250
NEW
Prod No. 11617

MZA-Artikelnr.:   10807    

SKF

Neues Rillenkugellager der Firma SKF.
Die genaue Bezeichnung lautet: 6302 C3

passend für: Lagerbuchse Motor ES 175/0, ES 250/0, ES 175/1, ES 250/1, ES 175/2, ES 250/2, ES 300, TS 250/0, TS 250/1, ETS 250, ETZ 250, ETZ 251, ETZ 301,
und im Getriebe S50, Schwalbe KR51/1, Spatz SR4-1 (Kickstarter), Star SR4-2, Sperber SR4-3 und Habicht SR4-4.
Die Eigenschaften des Lagers sind:

Innendurchmesser: 15mm

Außendurchmesser: 42mm

Breite: 13mm

Lagerluft: C3 Erhöhte radiale Lagerluft

Grenzdrehzahl: 38000 Umin

Referenzdrehzahl: 24000 Umin

Abdichtung: keine

Lagerkäfig: Metall
 
 

Simson Nummer: 00111500
MZ Nummer: 93-94.228
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,30 EUR
incl. 19% tax excl. Shipping costs
Kupplung komplett passend für MZ ETZ 250 251 TS 250/1
172,00 EUR
incl. 19% tax excl. Shipping costs
Kupplung komplett REGENERIERT passend für MZ ETZ 250 251 TS 250/1
Prod No. 7327

ost2rad

Regenerierte, originale Kupplung passend für MZ ETZ 250, ETZ 251 und TS 250/1. Folgende Teile sind verbaut: Kugellager 16005, Sicherungsbleche, Druckflansch, Druckfedern, Scheiben, Muttern, Kupplungskörper, Innenlamellen, Außenlamellen, Zahnkranz, Druckplatte mit Distanzbolzen. Das Kupplungspaket ist fertig montiert.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
164,90 EUR
incl. 19% tax excl. Shipping costs
Locking plates clutch MZ 250
Prod No. 1279
Bild Nr.: 8  

ost2rad

12 pieces of safety plate for the screws with all couplings of MZ of following models: ES175, ES250 everybody, ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301.

MZ number: 05-44.068

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
9,30 EUR
incl. 19% tax excl. Shipping costs
Needle bearing 22x26x26 clutch MZ 250
Prod No. 2139
Bild Nr.: 20  
MZA-Artikelnr.:   10825    

MZA

New needle wreath, needle card cage KK 22x26x26 for the coupling suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251. This bearing is two-rowed.

MZ number: 94-02.502

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
5,50 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 41 products)