Tafel 6 Kupplung - Tachometer mit Antrieb ES

Washer for srews galvanized
Prod No. 1372

Replika

Wearing parts for screws with 3 mm to 12 mm of diameter. All discs are galvanised.

Please, click on the picture to determine size.

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,02 EUR
incl. 19% tax excl. Shipping costs
Sechskantmutter verzinkt
Prod No. 1367

Replika

Mutter nach deutschem Industriestandard, verzinkte Ausführung.
Bitte gewünschte Größe auswählen:
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,04 EUR
incl. 19% tax excl. Shipping costs
Spring washer, explosive ring galvanized
Prod No. 1373

Replika

Feather disc in the best spring steel, German industrial standard and galvanised. For screws of 3 mm to 12 mm of diameter.

Please, click on the picture to determine the size.

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,04 EUR
incl. 19% tax excl. Shipping costs
Hexagon screw M6, galvanized
Prod No. 1427

Replika

Galvanised hexagon bolts after German industrial standard, metrical thread M6.

Please, for the choice of the length click on the picture:

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,08 EUR
incl. 19% tax excl. Shipping costs
Hexagon screw M8, galvanized
Prod No. 1428

Replika

Galvanised hexagon bolts built after German industrial standard, metrical thread M8.

Please, for the choice of the length click on the picture:

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
from 0,13 EUR
incl. 19% tax excl. Shipping costs
End cap for conduit cable diameter 2.5 mm
0,45 EUR
incl. 19% tax excl. Shipping costs
Bulb 6V 1.2W BA7s
Prod No. 090538

FEZ

Sphere lamp for speedometer lighting and revolution counter lighting suitable for all SIMSON and MZ 6V:




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,50 EUR
incl. 19% tax excl. Shipping costs
Bowden gray, diameter 2.5 mm
Prod No. 2487-2.5
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,90 EUR
0,90 EUR per m
incl. 19% tax excl. Shipping costs
Sphere lubrication head
Prod No. 2063

Replika

New lubricating nipple suitably for different models of MZ. The thread is M6. This cone lubrication head is galvanised.

MZ number: 93-74.843

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,00 EUR
incl. 19% tax excl. Shipping costs
Solder connector B 1,8 x 13 (clutch, brake cable 1.5 mm)
1,10 EUR
incl. 19% tax excl. Shipping costs
Bulb 12V 1.2W BA7s
Prod No. 090226

MZA-Artikelnr.:   10606-00S    

GLWO

Sphere lamp for all speedometer lightings and revolution counter lightings suitable for all SIMSON and MZ 12V.




DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,30 EUR
incl. 19% tax excl. Shipping costs
Bowden cable, diameter 1.5 mm
Prod No. 2489-1.5
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,30 EUR
1,30 EUR per m
incl. 19% tax excl. Shipping costs
Bulb holder brass
Prod No. 172880

MZA-Artikelnr.:   10025    

MZA

Bulb holder for all MZ models from brass. Measures: ca. diameter. 10mm Length: 18mm. For the use in revolution counter and speedometer. The suitable lamps have the No. 090538.

MZ number: 10297

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,50 EUR
incl. 19% tax excl. Shipping costs
Kugelschmierkopf A6 Schmiernippel ALTE Form
Prod No. 7389

Replika

Neues Schmiernippel in der alten Form passend für verschiedene Modelle von MZ und SIMSON AWO. Das Gewinde ist M6. Dieser Kegelschmierkopf ist verzinkt und nach dem Muster des Originalteils gefertigt.
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,60 EUR
incl. 19% tax excl. Shipping costs
Spring for clutch MZ250 increasingly
Prod No. 1159

ost2rad

Special spring for the couplings all MZ - 250th models. This spring was developed for sports couplings, however, is applicable also to the better separation of the disks with the standard machines. The spring tension is raised compared with the standard spring about 15%. German production.

MZ number: 05-44.126

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,80 EUR
incl. 19% tax excl. Shipping costs
Mutter Befestigung Tacho und DZM passend für MZ TS ETZ
Prod No. 6653

MZA-Artikelnr.:   84071-A-M    

MMB

Neue Plastikmutter M16 zur Tachometer- und Drehzahlmesserbefestigung passend für MZ ETZ 125, ETZ 150, ETZ 250, ETZ 251, TS 125, TS 150, TS 250.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,80 EUR
incl. 19% tax excl. Shipping costs
Spring plate clutch MZ 250
Prod No. 1795

ost2rad

New spring washer for the coupling suitably with all MZ ES175 / 2, ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1, ETZ250 and ETZ251.

MZ number: 05-44.074

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Gummiring unter Tachoring ETZ ETS TS ES AWO
Prod No. 11169

ost2rad

Neuer Gummidichtring unter dem Chromring vom Tachometer, passend für ES, TS, ETS, ETZ, Simson AWO Sport und AWO Touren.
DETAIL
Not available
Distanzbolzen der Druckplatte Kupplung passend für MZ 250
Prod No. 7570

ost2rad

Neuer Distanzbolzen in der Kupplungsdruckplatte passend für MZ ES175/0, ES250/0, ES175/1, ES250/1, ES300, ES250/2, ETS250, TS250/0, TS250/1, ETZ250 und ETZ251.
MZ Nr.: 05-44.061
DETAIL
Not available
Schutzkappe Bowdenzugschraube 2 Stück
Prod No. 254

Replika

1 Paar Schutzgummi für Stellschraube an den Bowdenzügen. Passend für alle MZ und Simson- Modelle.
MZ Nummer: 16-29.017,00-08.172

Simsonkatalog Nr: 175751,65038

Schutzkappe


DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,00 EUR
incl. 19% tax excl. Shipping costs
Paßhülse Kupplungsdeckel 16mm ES ETS TS ETZ 250
Prod No. 11244

Replika

Neuer Bolzen am Kupplungsdeckel passend für ES 250, ETS 250, TS 250 und ETZ 250. Originalteil.

Durchmesser: 10mm
Länge: 16mm
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,50 EUR
incl. 19% tax excl. Shipping costs
Stop disk coupling body MZ 250 ES, TS, ETZ
Prod No. 2763

Replika

New disk for the coupling between coupling package and impeller with internal catch (double wheel) suitably for MZ ES250, ETS250, ES250 / 1, ES250 / 2, TS250, TS250 / 1, ETZ250, ETZ251.

MZ number: 05-44.138

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,90 EUR
incl. 19% tax excl. Shipping costs
Bowdenzug, Kupplung - schwarz - ES175/1, 175/2, 250/1, 250/2, 300
NEW
Prod No. 11728

MZA-Artikelnr.:   28043G    

MOTOFLEX

Neuer Kupplungszug passend für mit hohem Lenker.


Farbe Seilzug: SCHWARZ GRAU SILBERGRAU


Maße: ca.970mm Gesamtlänge 900mm Hülle.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,99 EUR
incl. 19% tax excl. Shipping costs
Bowdenzug, Kupplung - grau - ES175/1, 175/2, 250/1, 250/2, 300
NEW
Prod No. 11720

MZA-Artikelnr.:   28043H    

MOTOFLEX

Neuer Kupplungszug passend für mit hohem Lenker.


Farbe Seilzug: SCHWARZ GRAU SILBERGRAU


Maße: ca.970mm Gesamtlänge 900mm Hülle.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,31 EUR
incl. 19% tax excl. Shipping costs
Driving plate ETZ 250,251/301 TS 250,250/1
Prod No. 358

Replika

Price is valid for a piece the complete set is illustrated.

MZ number: 05-44.123

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
4,50 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 76 products)