Tafel 18 Crankcase, Revolution counter driving mechanismrehzahlmesserantrieb

Adjusting plate for clutch MZ 250
Prod No. 1324
Bild Nr.: 6  

Replika

Set disk in the revolution counter cabinet ETZ 250,251/301 TS 250,250/1 ES 175/2,250/2, for coupling setting.

MZ number: 05-41.053

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
10,10 EUR
incl. 19% tax excl. Shipping costs
Arresting screw MZ250, Set
Prod No. 680

Replika

3 - piece set, with arresting screw, spring and sphere for the circuit of the MZ - models: ES175 / 2, ES250 / 2, ETS250, TS250, TS250 / 1, ETZ250, ETZ251, ETZ301. Of all new parts, the screw is galvanised.

MZ number: 05-47.025

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
6,50 EUR
incl. 19% tax excl. Shipping costs
Arretierschraube Schaltung passend für MZ 250
Prod No. 10188

FEZ

Neue verzinkte Arretierschraube für die Schaltung passend für MZ ES 175/2, ES 250/2, ETS 250, TS 250, TS 250/1, ETZ 250, ETZ 251, ETZ 301.
MZ Nummer: 05-47.025
DETAIL
Not available
Ausgleichsscheibe Kurbelwelle 37x47x passend für MZ ES TS 125, 150
0,80 EUR
incl. 19% tax excl. Shipping costs
Ausgleichsscheibe Kurbelwelle 50x62x passend für ES TS 250
Prod No. 10183

Replika

Neue Distanzscheibe für die Kurbelwelle im Motor rechts passend für ES 250/1, ES 250/2, ES 175/1, ES 175/2, ETS 250 und TS 250/0. Diese Passscheibe gibt es in verschiedenen Stärken.

Bitte gewünschte Stärke auswählen.
MZ Nummer: 00-18.176, 00-18.177, 00-18.178, 00-18.179
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,90 EUR
incl. 19% tax excl. Shipping costs
Ausgleichsscheibe Schaftrad 37x47x passend für MZ ETZ 125, 150
0,80 EUR
incl. 19% tax excl. Shipping costs
Bearing sleeve for clutch pressure piece - crankshaft  MZ 250
Prod No. 1088
Bild Nr.: 8  

FEZ

Curve platen for the gears of the abovementioned MZ - models. It concerns a new part, original MZ - production.

MZ number: 05-41.097

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
34,00 EUR
incl. 19% tax excl. Shipping costs
Blanking plugs Lima MZ 250
Prod No. 1182
Bild Nr.: 18  

Replika

3rd setcover plug for engine cabinet below the ignition.

MZ number: 05-41.048

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,90 EUR
incl. 19% tax excl. Shipping costs
Circlip crankshaft bearing 6305 ES 250
Prod No. 1125

Replika

The locking ring which fastens the crankshaft bearing in 6305, for all MZ 250 4-speed engines.

MZ number: 94-40.661

DETAIL
Not available
Cover cap clutch cover black MZ 250 TS ETZ
Prod No. 3705

Replika

Small lid for the coupling lid for types MZ TS250, ETZ250 and ETZ251, also suitably for types ES175, ES250 and ETS250. This final cap is an original continuance from aluminium, black varnished.



DETAIL
Not available
Cover cap clutch cover MZ 250, ES ETS TS ETZ
Prod No. 3704

MZA-Artikelnr.:   15576-00M    

Small lid for the coupling lid for types MZ TS250, ETZ250 and ETZ251, also suitably for types ES175, ES250 and ETS250. This final cap is an original continuance from aluminium with light camp tracks.



DETAIL
Not available
Dichtring Kupfer A 14x20 Arretierschraube MZ 250
0,40 EUR
incl. 19% tax excl. Shipping costs
Dichtung Dichtkappe Abtrieb passend für MZ 250 4-Gang - Variante 2
Prod No. 7115

MZA-Artikelnr.:   35070    

PLASTANZA

Neue Dichtung zur Dichtkappe auf der Abtriebswelle passend für MZ Typen ES175/0, ES175/1, ES175/2, ES250/0, ES250/1, ES250/2 Trophy, ES300, ETS250 und TS250 mit 4-Gang Motor. Die Dichtung hat 4 Löcher. Durchmesser außen ca. 68mm, innen ca. 48mm.
MZ Nummer: 02-845.21-0, 02-45.021
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Dividing disk for engine cabinet MZ ETZ, TS250 / 1
Prod No. 2419

Replika

New elastic disk in the engine cabinet suitably with all MZ ETZ125, ETZ150, ETZ250, ETZ251 and TS250 / 1.

MZ number: 12-41.042

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
1,60 EUR
incl. 19% tax excl. Shipping costs
Elastic sealing ring under cabinet lid revolution counter MZ250
Prod No. 1719
Bild Nr.: 5  

Replika

Level elastic seal under the small locking lid for tachometre driving mechanism or final lid without driving mechanism in the engine cabinet with all MZ 175, 250 and 300 ccm.

MZ number: 05-41.051

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,00 EUR
incl. 19% tax excl. Shipping costs
Feder Arretierschraube passend für MZ 250
Prod No. 7444

ost2rad

Neue Druckfeder 0,8x5,5x11,5 für Arretierschraube Schaltung passend für MZ ES 175/2, ES 250/2, ETS 250, TS 250, TS 250/1, ETZ 250, ETZ 251, ETZ 301.
MZ Nummer: 94-65.050
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,00 EUR
incl. 19% tax excl. Shipping costs
Fitting is for connection piece with pull spindle MZ 250
Prod No. 2233

Replika

New supporting fitting for the clutch cable suitably with all MZ ETZ250, ETZ251, TS250, TS250 / 1 and ES250 / 2. This fitting is from plastic.

MZ number: 05-44.108

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,90 EUR
incl. 19% tax excl. Shipping costs
Gasket R - MZ Lima, ES, ETS, TS 250
Prod No. 3095

ost2rad

Gasket seal made of special paper between dynamo machine and crankcase, suitable for all 4-gear engines of the MZ types ES 125, ES 250, ES300, ETS250 and TS250 -1.



DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,30 EUR
incl. 19% tax excl. Shipping costs
Gummistopfen Leelaufschalter passend für IWL MZ RT, ES, ETS, TS 125, 150, 250
Prod No. 7615

Replika

Neue Kabeldurchführung im Motor zum Leerganganzeiger passend für MZ RT125/3, IWL Berlin, Troll, ES125, ES150, ES175, ES250, ES175/1, ES250/1, ES300, ES175/2, ES250/2, ETS125, ETS150, ETS250, TS125, TS150 und TS250/0.
MZ Nr.: 02-48.008
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Joint washer for clutch cover MZ ES, TS, ETS 250
Prod No. 2079
Bild Nr.: 29  

ost2rad

New seal for the coupling lid suitably with all MZ ES250 / 0, ES250 / 1, ES250 / 2, TS250 / 0, TS250 / 1 and ETS250.

MZ number: 05-41.134

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,60 EUR
incl. 19% tax excl. Shipping costs
Kugel 8mm passend für MZ 250
Prod No. 7493

FEZ

Neue Kugel für Kickstarterkurbel passend für MZ ES 175/0, ES 175/1, ES 175/2, ES 250/0, ES 250/1, ES 250/2, ETS 250, TS 250/0, TS 250/1, ETZ 125, ETZ 150, ETZ 250, ETZ 251. Außerdem Kugel für Schaltarretierschraube passend bei MZ ES 175/0, ES 175/1, ES 175/2, ES 250/0, ES 250/1, ES 250/2, ETS 250, TS 250/0, TS 250/1, ETZ 250, ETZ 251. Die genaue Bezeichnung ist Kugel 8 III DIN 15515.
MZ Nummer: 94-00.984
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
0,40 EUR
incl. 19% tax excl. Shipping costs
Kupplungsdeckel passend für MZ ES, ETS, TS 175, 250
Prod No. 7551

ost2rad

Neuer Kupplungsdeckel passend für MZ ES175/2, ES250/2, ETS250, TS250/0 und TS250/1. Der Deckel ist roh, also nich poliert alle Bohrungen sind vorhanden.
MZ Nr.: 05-41.133
DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
92,80 EUR
incl. 19% tax excl. Shipping costs
Labyrinth plug for filling of oil MZ all 125, 150
Prod No. 1043
Bild Nr.: 28  

FEZ

Seal for everybody 125, 150th models MZ solid rubber.

MZ number: 05-41.048

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
3,30 EUR
incl. 19% tax excl. Shipping costs
Lock washer 16 TGL-470 MZ TS 250, ETZ 250, 251
Prod No. 2571

Replika

New locking disk 16 in the engine cabinet suitably with all TS250, TS250 / 1, ETZ250, ETZ251.

MZ number: 94-37.264

DETAIL
Shippingtime: ca. 1 Week ca. 1 Week
(abroad may vary)
2,10 EUR
incl. 19% tax excl. Shipping costs
Show 1 to 25 (from a total of 55 products)