2.12. Hinterradfederung

Bild Nr.: 1  

DETAILS

Bild Nr.: 1  6

New set for the wrestling attachment suitably with MZ ETZ125, ETZ150, ETZ250, ETZ251, TS125, TS150, TS250 / 0, TS250 / 1 and ES250 / 2 consisting of 3x nut hexagonal M18x1,5 and 2x washer M18. The nuts and disks are galvanised.

DETAILS

MZ number: 94-31.724, 00-18.152

Bild Nr.: 16  

New protective shell on top chromium-plates suitably for all shock absorbers MZ with edge. The shell is clamped on top by the half bowls. Good quality. Length ca. 135 mm, inside diameters below ca. 62 mm, inside diameters on top ca. 38 mm, external diameters ca. 63 mm

DETAILS

MZ number: 05-23.025

Bild Nr.: 15  

New black plastic sleeve for rear shock absorber suitably with all MZ ETZ125, ETZ150, ETZ250, ETZ251 and TS125, TS150, TS250. The sleeve sits under the chrome spring.
DETAILS

MZ number: 13-23.046

Bild Nr.: 3  4

Complete set as illustrated for the storage of the wing and the engine with MZ, all models ETZ. Including rubber for engine suspension and wrestling bearing. A total of 6 parts.

DETAILS

Big elastic element for the wrestling bearing all ETZ and TS - models. Total length approx. 44 mm, including rubber and inner sleeve.

DETAILS

MZ number: 13-21.225

Bild Nr.: 25  

Elastic buffer for the upper ring holder with MZ suspension struts. Fits to almost all models, inside diameters 16 mm.

DETAILS

MZ number: 05-23.161

Bild Nr.: 32  

New rubber for the upper eye of the shock absorber incl. metal pipe with diameter 10 mm. Suitably to all MZ suspension struts offered by us.
Outside dimension: For drillings in the suspension strut of 25 - 28 mm.
Width ca. 17 mm

DETAILS

MZ number: 05-23.161

Neues Set Schrauben zur Befestigung der Federbeine oben und unten speziell für ETZ125, ETZ150, ETZ250 und ETZ251 bestehend aus 4x Schraube, 4x Federring und 4x K-Scheibe, verzinkt.   
DETAILS

MZ Nummer: nicht verfügbar

Bild Nr.: 0  

M10 screw with external disk for the attachment of the rear shock absorbers with MZ - models. For the cover of the upper buffer rubber.

DETAILS

Bild Nr.: 28  

M10 screw with locking ring for the attachment of the rear shock absorbers with MZ - models. For the cover of the lower buffer rubber.

DETAILS

Verzinkte Sechskantschrauben nach deutscher Industrienorm, metrisches Gewinde M10. Schlüsselweite 17.

DETAILS

Bitte gewünschte Länge auswählen:

DETAILS

DETAILS

DETAILS

Bild Nr.: 19  

Distance ring, suitable for all rear dampers with chrome sleeve of MZ. The ring serves as spacer between the upper and the lower protective sleeve.

DETAILS

Chromium-plated feather for rear suspension unit für all normal shock absorbers with being outside feather with MZ ETZ 250 , 251 , 301. Inside diameter 41 mm, Wire strength 7 mm, Length unbuilt-in 282mm , ca. 16 bends. Also for the costs rise with ETZ 125/150 and Simson suitable.
Made in Germany!

DETAILS

2 pieces of being outside springs for shock absorber, suitably to all models ETZ and TS250. The springs are black powder-coated completely.
Diameter outside 57 mm, wire strength 7 mm, therefore about 10% harder than original. Sales Only in pairs.

DETAILS

MZ number: 32-26.003

Bild Nr.: 14  

2 pieces of supporting ring halves for suspension strut behind, all TS250 and models ETZ. Solid implementation, plastic.

DETAILS

MZ number: 22-26.014

MZA-Artikelnr.:   15924-00M    

Stoßdämpferelement, schwarz für ETZ251








DETAILS

New back damper with exterior spring, suitable for all MZ TS 250 and TS 250/1 with side car. Reinforced version with adjusting lever. Excellent quality. Delivered in pairs.

DETAILS

Bild Nr.: 13  

New rear suspension unit einstetzbar for all MZ-types except ETZ 251/301. It concerns an original spare part. The quality very feels well. This suspension strut is for the installation on the left side of the motorcycle.

DETAILS

MZ number: 30-26.002

Bild Nr.: 13  

New rear suspension unit einstetzbar for all MZ-types except ETZ 251/301. It concerns an original spare part. The quality very feels well. This suspension strut is for the installation on the right side of the motorcycle.

DETAILS

MZ number: 30-26.002

A pair of rear shock absorbers with being outside spring in stable construction method, like the original. Lower element and spring bright lustre-chromium-plated. Upper inside part black. This suspension strut is with shifting lever, doubly in the hardness adjustably. The distance (in the not built-in state) between the eyes middle - middle amounts to about 380 mm. Therefore for all models ETZ 251 and ETZ 301 suitable. The delivery occurs including the upper and lower buffer rubber / rubber sleeve. It concerns a special price in limited number of pieces!

DETAILS

MZ number: 32-26.010

DETAILS