Suspension units / Front fork / Dampers

MZA-Artikelnr.:   15238-00M    

Right rostrum for the cross-beam absorption of the tele-fork with attachment of the outer caliper of the models ETZ 125, 150, 250, 251, 301. It concerns a new, original MZ part, varnishes black (with bearing tracks).

DETAILS

MZ number: 30-22.047

Elastic buffer for the upper ring holder with MZ suspension struts. Fits to almost all models, inside diameters 16 mm.

DETAILS

MZ number: 05-23.161

New rubber for the upper eye of the shock absorber incl. metal pipe with diameter 10 mm. Suitably to all MZ suspension struts offered by us.
Outside dimension: For drillings in the suspension strut of 25 - 28 mm.
Width ca. 17 mm

DETAILS

MZ number: 05-23.161

Satz Schutzhülsen für Federbeine, passend für Typ ES125, ES150, ES175, ES250, ES175/1, ES250/1, ES175/2, ES250/2 ES300, TS250/0, TS250/1, ETZ250 und ETZ251 mit gelemmten (nicht aufgeschraubten) Hülsen. Das Set besteht aus 1x obere Hülse, 1x untere Hülse und 1x Führungsring. Die Hülsen sind NVA- Grün.
Originaler DDR-Altbestand.
DETAILS

MZ Nummer:
05-23.025
16-23.010
05-23.112

DETAILS

Neues Set Schrauben zur Befestigung der Federbeine oben und unten speziell für ETZ125, ETZ150, ETZ250 und ETZ251 bestehend aus 4x Schraube, 4x Federring und 4x K-Scheibe, verzinkt.   
DETAILS

MZ Nummer: nicht verfügbar

2 Stück Chromhülsen für Stoßdämpfer, passend für MZ Typen ES, ETS und TS mit 125, 150, 175 und 250 ccm, für vorn und hinten. Diese Ausführung ist gebördelt, nicht mit Befestigungsschrauben. Dieser Satz ist für ein Stück Federbein, bestehend aus oberer und unterer Hülse und Distanzring. Gute Qualität, Beschichtung mit Kupfer - Nickel - Chrom.

DETAILS

M10 screw with external disk for the attachment of the rear shock absorbers with MZ - models. For the cover of the upper buffer rubber.

DETAILS

M10 screw with locking ring for the attachment of the rear shock absorbers with MZ - models. For the cover of the lower buffer rubber.

DETAILS

A pair of packing washers suitable for all telescopic front fork from MZ with a cross-beam diameter from 35mm.
Therefore for all ETZ models and all TS models with the 35mm fork (older models had a cross-beam diameter of 32 mm, there do not fit these disks).

DETAILS

MZ number: 00-18.210

DETAILS

Neue Schutzhülsen, oben und unten, verchromt, passend für alle Stoßdämpfer MZ Typen ES mit Rand. Die unteren Chromhülsen werden am Verstellring angeschraubt. Gute Qualität.
Geliefert werden insgesamt 8 Stück Hülsen und 4 Stück Distanzringe zu diesem Set - Sonderpreis.
Eingesetzt z.B. bei Typen wie ES125, ES150, ES 175/0, ES 250/0, ES 175/1 und ES 250/1. Die Hülsen können auch bei IWL Troll TR15 verbaut werden, wenn die entsprechenden Verstellringe zum Schrauben verwendet werden.
DETAILS

New set of cover caps for the telescope fork suitably for all MZ with 35 mm of fork. This set passes of 2 caps for the screw plug tele-fork and 1 cap for the tax pipe.

DETAILS

MZ number: 13-22.133, 22-22.167

4-part set chromium-plated compression springs for the tele-fork suitably with all MZ ETZ and TS with 35 mm of fork. 2 springs are for the valve disk (22-22.279) and 2 springs are for the end stop (22-22.280).

DETAILS

MZ number: 22-22.279, 22-22.280

Distance ring, suitable for all rear dampers with chrome sleeve of MZ. The ring serves as spacer between the upper and the lower protective sleeve.

DETAILS

DETAILS

DETAILS

Chromium-plated feather for rear suspension unit für all normal shock absorbers with being outside feather with MZ ETZ 250 , 251 , 301. Inside diameter 41 mm, Wire strength 7 mm, Length unbuilt-in 282mm , ca. 16 bends. Also for the costs rise with ETZ 125/150 and Simson suitable.
Made in Germany!

DETAILS

2 pieces of supporting ring halves for suspension strut behind, all TS250 and models ETZ. Solid implementation, plastic.

DETAILS

MZ number: 22-26.014

New back damper with exterior spring, suitable for all MZ ETZ 250 with side car. Reinforced version with adjusting lever. Excellent quality. Delivered in pairs.

DETAILS

New back damper with chromed sleeve, suitable for all MZ ETZ 250 with side car. Reinforced version with adjusting lever. Excellent quality. Delivered in pairs.

DETAILS

New back damper with exterior spring, suitable for all MZ TS 250 and TS 250/1 with side car. Reinforced version with adjusting lever. Excellent quality. Delivered in pairs.

DETAILS

New back damper with chromed sleeve, suitable for all MZ TS 250 and TS 250/1 with side car. Reinforced version with adjusting lever. Excellent quality. Delivered in pairs.

DETAILS

New pipe for the tele-fork suitably with all models MZ ETZ and TS with 35 mm of fork.

DETAILS

MZ number: 22-22.266

Spare part for tele-forks TS and ETZ with cross-beam diameter of 35 mm. Therefore for all ETZ and later models TS.

DETAILS

MZ number: 22-22.277