Exhaust pipes

Clip between exhaust and exhaust pipe. For all MZ models with 125 or 150ccm. The best coating (Chrome and Zinc), strong quality, chromium-plates.

DETAILS

MZ number: 12-27.006

Connecting clamp between silencer and exhaust pipe, nickel-plates. For all MZ TS and ETZ with 250 or 300 cubic centimetres. Strong quality.
DETAILS

MZ Nummer: 16-27.122

New nut, coupling nut for the silencer from MZ model ETZ250. High quality and very galvanised. A collar is turned on in front. This nut is the longer implementation and only to recommend with the ETZ models, an elbow seal is not necessary.

DETAILS

MZ number: 30-28.004

New nut, coupling nut for the silencer from MZ ETZ251 and ETZ300. High quality and very galvanised. A collar is turned on in front. This nut is the longer implementation and only to recommend with the ETZ models, an elbow seal is not necessary. This nut is same to building to the ETZ250, also for cylinder with 300 cubic centimetres.

DETAILS

MZ number: 30-28.004

MZA-Artikelnr.:   50502-A-S    

New tube of polish, especially for chrome plated parts. 150ml. The polish contents orange oil, cleans, polishes and conserves reliably all chromed parts. Using instructions are on the packaging.

DETAILS

16-part set of screws for all exhaust pipes of  all TS and ETZ types. The set consists of 6 screws, 5 nuts, 4 spring rings and 1 washer. all parts are made of high-grade steel and are therefore rust free. Matches perfectly to the clamps offered in the shop.



DETAILS

Exhaust bent, bright lustre-chromium-plated, the best quality, unthrottled! Length approx. 104 cm for elbow connection 35 mm, the elbows is also available in the shop. It is an import which is selected of us and is monitored constantly, no cheap goods. The exhaust corresponds in the appearance, in the power and in the sound as much as possible to the original.

DETAILS

MZ number: 32-28.071

Silencer pipe for MZ ETZ125 and ETZ150. The elbow is bright lustre-chromium-plated outside, matt-chromium-plated inside. All exhaust pipes are new. All models are unthrottled and bring guaranteed full power. In our shop you find exhaust pipes for all models from MZ. With this elbow no seal is necessary if the right elbow nut (order number 215) is obstructs, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop.
Wir gewähren auch Garantie auf die Chromqualität!

DETAILS

MZ number: 32-28.070

Inside measure amounts to about 40 mm, silencer pipe for MZ ETZ 250, also with 300 cubic centimetres of engine. The exhaust pipe is bright lustre-chromium-plated outside, inside matt-chromium-plated. All exhaust pipes are new. All models are unthrottled and bring guaranteed full power. In our shop you find silencer pipes for all models from MZ. With this elbow no seal is necessary if the right elbow nut (order number 168) is obstructs, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop. We also grant guarantee on the chrome quality!

DETAILS

MZ number: 30-28.002

Exhaust pipe for MZ TS 125 and TS 150. The silencer pipe is bright lustre-chromium-plated outside, matt-chromium-plated inside. All exhaust pipes are new.  All models are unthrottled and bring guaranteed full power. In our shop you find exhaust pipe for all models of MZ with this exhaust pipe no seal is necessary if the right elbow nut is right, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop.

DETAILS

MZ number: 13-27.132

Silencer pipe for MZ ES125 and ES150. It concerns the situation kind model. Not around the quite old implementation which there was with the first models. This fits with all ES125/1, ES125/2, ES150/1 and ES150/2. With some models ES-0 if he does not fit. The exhaust pipe is bright lustre-chromium-plated outside, matt-chromium-plated inside. All exhaust pipes are new. All models are unthrottled and bring guaranteed full power. In our shop you find silencer pipes for all models from MZ. With this elbow no seal is necessary if the right elbow nut is obstructs, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop. We also grant guarantee on the chrome quality!

DETAILS

MZ number: 13-27.132

MZA-Artikelnr.:   35678    

This elbow has a small margin and is applicable for following models if these had like original a short exhaust: ES250, ES250/1, ES175. The exhaust pipe is a copy. This part we produce and the esilencer pipe corresponds in quality and optics exactly to the original one exhaust pipe. This elbow is matt-chromium-plated inside and is completely bright lustre-chromium-plated outside. You find a suitable exhaust also in the shop or on inquiry. Please, note that this exhaust pipe is the long version (Please compare with the item number 513)

DETAILS

MZ number: 16-27.099

Silencer pipe for the ES-models 175/2, 250/2 as well as ETS 250. This model is without margin for the original clamp attachment. The elbow is outside completely bright lustre-chromium-plated with an excellent material strength. By some old implementation one needs the elbow with margin. This has the order number 517.

DETAILS

MZ number: 16-27.099

MZA-Artikelnr.:   35678    

New exhaust pipe for ES250. The silencer pipe has a small margin and is applicable for all ES 175, ES 175/1 und ES 250, ES 250/1, which had an elbow seal. The part is a copy and it corresponds in quality and optics exactly to the original one. This exhaust pipe is matt-chromium-plated inside and is completely bright lustre-chromium-plated outside.

DETAILS

MZ number: 05-827.73-0

This exhaust pipe has a small margin and is applicable for all MZ-models ES 175/2, and ES 250/2 and ETS 250. It is a copy. This part we produce and the exhaust pipe corresponds in quality and optics exactly to the original exhaust pipe. This silencer pipe is matt-chromium-plated inside and is completely bright lustre-chromium-plated outside. You find a suitable exhaust also in the shop.

DETAILS

MZ number: 16-27.099

Set from two parts. Front hold brace and hold brace galvanised of the exhaust to the engine for TS 125 and TS 150.

DETAILS

MZ number: 13-27.156, 13-27.135

New reinforcing plate for the connection clamp, suitable for all MZ TS 250/0, TS250/1, ETZ250 und ETZ251.

DETAILS

MZ Nummer: 22-28.141

DETAILS

Neuer Klemmring für Krümmermutter passend für MZ ES 175/2, ES 250/2 und ETS 250 mit Steckkrümmer. Originalteil mit Lagerspuren.
DETAILS

MZ Nummer: 16-27.102

Innenmaß beträgt etwa 40 mm, Auspuffrohr passend für MZ ETZ 250. Der Krümmer ist außen hochglanzverchromt. Bei diesem Krümmer ist keine Dichtung erforderlich, das entspricht der originalen Bauweise. Natürlich ist auch das gesamte Auspuff-Zubehör in diesem Shop erhältlich. Dieser Krümmer entspricht genau dem Original, exakte Passform und ausgezeichnete Verchromung sind garantiert! Ungedrosselte - offene Vaiante wie serienmäßig. 
DETAILS

In Deutschland verchromt, mit höchsten Oberflächenansprüchen der Automobilindustrie: MvD24 Cu-Ni-Cr

Innenmaß beträgt etwa 40 mm, Auspuffrohr passend für MZ TS 250/0 und TS 250/1. Der Krümmer ist außen hochglanzverchromt, innen mattverchromt. Bei diesem Krümmer ist keine Dichtung erforderlich, wenn die richtige Krümmermutter (Bestellnummer 78) angebracht ist, das entspricht der originalen Bauweise. Natürlich ist auch das gesamte Auspuff-Zubehör in diesem Shop erhältlich. Dieser Krümmer entspricht genau dem Original, exakte Passform und ausgezeichnete Verchromung sind garantiert! Ungedrosselte - offene Vaiante wie serienmäßig. 
DETAILS

In Deutschland verchromt, mit höchsten Oberflächenansprüchen der Automobilindustrie: MvD24 Cu-Ni-Cr

DETAILS

DETAILS

MZA-Artikelnr.:   31126-B-M    

Neue verzinkte Überwurfmutter passend für ES125, ES150, ETS125, ETS150, TS125 und TS150. Die Löcher für den Hakenschlüssel sind eckig.
DETAILS

MZ Nr.:13-27.004

Neue Überwurfmutter passend für das Auspuffrohr passend für MZ ES125, ES150, ETS125, ETS150, TS125, TS150. Die Mutter ist verzinkt. Die Krümmermutter hat eine runde Aussparung für den Hakenschlüssel. Gewinde M45 x 1,5.
DETAILS

MZ Nummer: 13-27.157, 13-27.004