Exhaust pipes

Coupling nut for the elbow attachment in the cylinder of the models ETZ251 and ETZ301 as well as MuZ models with 250 and 300 ccm.
Chromium-plated implementation.

DETAILS

MZ number: 30-28.615

Inside measure about 40 mm, exhaust pipe for MZ ETZ251 and ETZ301. The silencer pipe is bright lustre-chromium-plated outside, matt-chromium-plated inside. All exhaust pipes are new. All models are unthrottled and bring guaranteed full power. In our shop you find exhaust pipe for all models of MZ with this silencer pipe no seal is necessary if the right elbow nut (order number 217) is right, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop. Please, follow: This exhaust pipe is shorter than the model ETZ 250, with sidecar must be often grown of the ETZ250.
We also grant guarantee on the chrome quality!

DETAILS

MZ number: 30-28.612

Rear exhaust hold clip one-piece, fully chromium-plated, with thread piece. Clip corresponds exactly to the original of the called models, by original attachment. For exhaust with about 90 mm of diameter.

DETAILS

MZ number: 16-27.112

Rear exhaust hold clip one-piece, fully chromium-plated, with thread piece. Clip corresponds exactly to the original of the called models, by original attachment. For exhaust with about 80 mm of diameter.

DETAILS

MZ number: 12-27.006

One Pair hold clamp for silencer suitable of the MZ models ETZ125 and ETZ150. 2-part set in the best optics. Both parts bright lustre-chromium-plated, corresponds exactly to the original.

DETAILS

MZ number: 32-28.049

New exhaust brace for the attachment of the exhaust in the border suitably for all MZ TS125 and TS150. This brace is varnished black. Total length approx. 37 cm.
DETAILS

MZ number: 13-27.133

Right and left weight-bearing clip for all exhaust of the models ETZ250 and 251 with original exhaust fixture. Outside part bright lustre-chromium-plated, inside part galvanised. Delivery in pairs.

DETAILS

MZ number: 16-27.113

Rod of silencer fastening of the models TS 250 und 250/1. The rod is new, the varnish has age-partly, however, scratch. It is a new genuine part including the complete bearing jacks. The matching clip has the order number 297.

DETAILS

MZ number: 22-28.138

New ring and distance shell for the brace in the exhaust suitably with all MZ ES, ETZ and TS with exhaust brace.

DETAILS

MZ number: 16-27.106, 16-27.048

MZA-Artikelnr.:   15733-00M    

Neue Scheibe für die Auspuffhalterung passend für MZ ETZ 125, 150, 250, 251 und 301.

Durchmesser außen: 17 mm
Durchmesser innen: 8 mm
Stärke: 1,5 mm
DETAILS

MZ Nummer: 00-18.211

Neue Verbindungsschelle zwischen Auspuff und Krümmer passend für MZ ES 175/1, ES250/1 und ES300. Die Schelle ist verchromt und hat eine Bohrung zur Befestigung.
DETAILS

MZ Nr.: 05-27.018

New seal for the exhaust pipe from aluminium suitably with all MZ ES, TS, ETS, ETZ 125 and 150. The external diameter approx. 43 mm.
DETAILS

New seal for the exhaust pipe from cupper suitably with all MZ ES, TS, ETS, ETZ 125 and 150. The external diameter approx. 44 mm.
DETAILS

New seal for the exhaust pipe from cupper suitably with all MZ ES, TS, ETS, ETZ 250 and ETZ 251. The external diameter approx. 47 mm.

DETAILS

DETAILS

DETAILS

More anew chromium-plated exhaust suitably for all MZ ETS125, ETS150, TS125 and TS150.

DETAILS

MZ number: 13-27.113

MZA-Artikelnr.:   18067    

New chromium-plated exhaust suitably for ES 125 and ES 150 in cigar form. This silencer is two-part. This is the long implementation. The length amounts to 960 mm, the diameter in the connection is 35 mm. The suitable silencer pipe has the article number 623.

DETAILS

MZ number: 13-27.113, 13-27.300

Exhaust for called models in the form of cigar. The exhaust is two-part, behind with cylindrical end. The whole length amounts to 1220 mm. It concerns the best quality of not distinguishing the highest-quality chromium plating, in power, sound and processing from the original!

DETAILS

MZ number: 16-27.088

New exhaust for called models. 2-part and form cigar. Please, before the purchase the ability of delivery ask, I must reserve these parts, because not many are available!

DETAILS

MZ number: 13-27.113

Exhaust for ETZ250 and 300, bright lustre-chromium-plated, the best quality. Length amounts to ca. 116 cm for elbow connection 40 mm. The exhaust pipe is also available in the shop. The exhaust corresponds in the appearance, in the power and in the sound as much as possible to the original. Also for sidecar operation suitable.

DETAILS

MZ number: 30-28.071

Exhaust for ETZ 251 and 301, bright lustre-chromium-plated, the best quality. Length ca. 106 cm for elbow connection 40 mm, the exhaust pipe is also available in the shop. The exhaust corresponds in the appearance, in the power and in the sound as much as possible to the original.

DETAILS

MZ number: 30-28.602

New exhaust for MZ of the models TS125 and TS150. It concerns not the genuine part, but around a copy. We guarantee the best processing! Chromium-plated, bright lustre implementation! For elbow with 36 mm of connection! Bitte The exhaust has behind a straight end.

DETAILS

MZ number: 13-27.113

New exhaust for MZ of the model TS250 and TS250 / 1. It concerns not the genuine part, but around a copy. We guarantee the best processing! The pot is suitable ca. 116 cm long and therefore also for sidecar operation. For the production elbow connection of ca. 40 mm. The exhaust is not divided, one-piece implementation. How the Originqal just construction form (not bent like the ETZ models). The end piece resembles in the appearance the ETZ exhaust. Material: Stable metal sheet from steel, bright lustre-chromium-plated, the best optics, faithful sound. This exhaust is in the power behaviour immediately to the original, not power-rising or power-restraining. Recommended accessories: exhaust pipe, coupling nut, clip for silencer, rear clip for all TS250 models. These parts are available everybody in this shop!

DETAILS

MZ number: 22-28.144

Inside measure amounts to about 40 mm, to elbows for MZ TS250, TS 250/1. The elbow is bright lustre-chromium-plated outside, matt-chromium-plated inside. All elbows are new. The quality is monitored by us, the chromium plating is exemplary therefore, the material strength is same or bigger as the genuine part. All models are unthrottled and bring guaranteed full power. In our shop you find elbow for all models of MZ with this elbow no seal is necessary if the right elbow nut (order number 78) is right, this corresponds to the original construction method. Of course the whole exhaust accessories are also available in this shop.
We also grant guarantee on the chrome quality!

DETAILS

MZ number: 22-28.132